Brand new Set of 4 Ispiri isr8 Carbon graphite 5x112 ET38 10x20 £1400ovno

[Vas]

Brand new Set of 4 Ispiri isr8 Carbon graphite 5x112 ET38 10x20
Brand new Pirelli P Zero 255/35/R20 all round

Will require spigot rings for the wheels and no centre caps

£1400 ovno






Sent from my iPhone using Tapatalk

[Markp]

All wheel and no tyre

[bam_bam]

Wow. Two fifty fives on tens. That some stretch.

[MK2Golf24v]

Wow. Two fifty fives on tens. That some stretch.

Its not really, 255 is an approved size for a 10". Not "stretched" at all.

[Markp]

Wow. Two fifty fives on tens. That some stretch.

Its not really, 255 is an approved size for a 10". Not "stretched" at all.

Ideal for 255 is MAX 9.5 j though you can indeed put 255 on 10s , it is the absolute MIN width advised.

[MK2Golf24v]

j

ETRTO Approve a 255 tyre on rims 8.5" - 10" wide.

[Brooner]

whats the offset and centre boar on these

[Vas]

whats the offset and centre boar on these

ET 38 and bore size is 67.5mm




Sent from my iPhone using Tapatalk

[Markp]

j

ETRTO Approve a 255 tyre on rims 8.5" - 10" wide.

Yep 9-9.5 ideal. 255 min on 10. 255 max on 8.5.
Still all wheel no tyre

PS just noticed the mk2 Golf bit - explains a lot. And as for j see here : https://www.wheel-size.com/size/audi/rs6/2016/

[bam_bam]

PS just noticed the mk2 Golf bit - explains a lot.

I've got money on it being this guy.

He just does it for the shitz n gigglez innit.

[Markp]

PS just noticed the mk2 Golf bit - explains a lot.

I've got money on it being this guy.

He just does it for the shitz n gigglez innit.

That’s the one
Kids eh?

[bam_bam]

PS just noticed the mk2 Golf bit - explains a lot.

I've got money on it being this guy.

He just does it for the shitz n gigglez innit.

That’s the one
Kids eh?

No, this guy is a grown man.
Am I correct in thinking the PZero 255/35R20 are 97Y? Shouldn't the C7 RS & RSp run on 102 or 100 respectively?

I love a can of worms...

[Eddie555]

The tyre stretch on those wheels would look worst if it wasn’t for the fact that p-zeros have a large rim protector. As seen in my attached picture you can see that normal fitting would give around 15mm of over hang protection of the rim. Whereas op’s rims have no protection whatsoever.

[Brooner]

here a handy site to tell you the correct size for your alloys

https://www.tyresizecalculator.com/tyre ... calculator

min for those would be 255 but ideal 265 to 275

[Vas]

here a handy site to tell you the correct size for your alloys

https://www.tyresizecalculator.com/tyre ... calculator

min for those would be 255 but ideal 265 to 275

i should of checked this when tyre shopping but at least in the min but I would consider splitting and selling the wheels on its own potentially as they need to go ... funds needed to give my car some TLC