RS4 B7 Spacers & Info Wanted.

Post by **c3bgc** » Thu Sep 06, 2012 11:04 pm

Hi all. Just purchased RS4 B7 and wondered if anyone had a set of H&R 8mm wheel spacers with bolts forsale?
Also looking for a panel filter if anyone has a contact number for a new one?
Thanks Barry

Post by **RS4KILLA** » Fri Sep 07, 2012 11:17 am

have some h&r spacers will check what size

Post by **Rory** » Fri Sep 07, 2012 12:16 pm

H&R spacers come in 5x100 and 5x112 (they have 10 holes on them) and from memory my h&r on my old car were £38 a set - if you were a week sooner I still had them but sold them last week!

Post by **Timster** » Fri Sep 07, 2012 2:57 pm

Don't much about with all the options, just contact Virdee and he'll supply the correct ones for the B7 (with the correct bolts), at a good price.
Job Done.

Edit: 38 quid is way-off for the RS4 however.

Post by **Virdee Autos** » Fri Sep 07, 2012 7:57 pm

We have both spacers and panel filters in stock.

Post by **Rory** » Fri Sep 07, 2012 7:58 pm

Timster wrote:Don't much about with all the options, just contact Virdee and he'll supply the correct ones for the B7 (with the correct bolts), at a good price.
Job Done.

Edit: 38 quid is way-off for the RS4 however.

I agree - I have mtm one on mine and they were WAY more than £38... But we do have a pcd of 5x112 so there is no reason why they won't fit - is there?

Post by **c3bgc** » Sat Sep 08, 2012 5:14 am

Hi all thanks for the info. I'll phone Virdee Autos next week as offshore at moment.
Also I have Miltek cat back resonated with valves is it worth looking into cats and downpipes?
I have been looking through the forum for info on what to do so sorry for you guys that have been asked or seen this 100 times but any info welcomed.
I don't want to change the car too much just that little bit extra.

Post by **c3bgc** » Sat Sep 08, 2012 5:23 am

RS4KILLA wrote:have some h&r spacers will check what size

Thanks. Just let me know when you find out.

Post by **PJC** » Sat Sep 08, 2012 6:15 am

100 cell cats makes a huge difference, will need mapping though.

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community