Page 1 of 2
Vossen CV1s
Posted: Wed Apr 22, 2015 5:05 pm
by BMW2RS4
Fancied a change of alloys for the summer tyres so went for a set of Vossen CV1s; square 20x10.5 ET30 (3mm spacer upfront); Pirelli Pzero 275/30r20; these rims are really deep concave! Supplied and refinished in matt black centres with gloss black lip by The Prestige Wheel Centre who were excellent as usual. I understand that the CV1s have now been discontinued from the Vossen range.
1784
1785
1783
1786
1787
Shows flush fitting of front wheel/tyre
1788
Re: Vossen CV1s
Posted: Wed Apr 22, 2015 5:08 pm
by kmpowell
Yes!
Re: Vossen CV1s
Posted: Wed Apr 22, 2015 5:30 pm
by Ozzyz
That looks awesome
Re: Vossen CV1s
Posted: Wed Apr 22, 2015 5:38 pm
by miatang
Very Nice
Re: Vossen CV1s
Posted: Wed Apr 22, 2015 9:08 pm
by RIV
Looks great!!!
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 10:09 am
by toyneg
looks awesome! i'd like a set of those on my B7
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 11:32 am
by bam_bam
That is some deep ass concavity! Noice, real noice.
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 11:47 am
by Outtlaw
Stunning, the whole package.
2nd pic down is the money shot for me
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 5:26 pm
by Snotsicle
I like. Very much.
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 6:05 pm
by BMW2RS4
Thanks for the positive feedback guys; really appreciate it
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 9:30 pm
by will1981
Very nice, the guys at prestige are great!
No rubbing on the 275's?
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 10:08 pm
by BMW2RS4
will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 10:32 pm
by will1981
BMW2RS4 wrote:will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4
All good then, I take it your on the KW lowering springs then? I have the H&R 15-20mm springs and was worried about the potential rubbing from 275's if I go for coilovers.
Yours looks perfect at that height!
Re: Vossen CV1s
Posted: Thu Apr 23, 2015 10:45 pm
by BMW2RS4
will1981 wrote:BMW2RS4 wrote:will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4
All good then, I take it your on the KW lowering springs then? I have the H&R 15-20mm springs and was worried about the potential rubbing from 275's if I go for coilovers.
Yours looks perfect at that height!
Yes, I'm on the KW coilover springs which allow height adjustability but can be used with the DRC. However, lowering is maxed out at both rears and front nearside. I would think that the full coilovers will give a larger range for lowering. BTW, not sure which wheels you are running but the CV1s are ET27 front (including 3mm spacer) and ET30 rear. You could probably go as low as ET25 with the 275s and still avoid rubbing but I would imagine that that is the limit at this ride height.
Re: Vossen CV1s
Posted: Fri Apr 24, 2015 12:56 am
by MikeFish
Very nice look you got there. Maybe that's what has been missing from the B8 for me; lowered with a nice concave wheel.