Fancied a change of alloys for the summer tyres so went for a set of Vossen CV1s; square 20x10.5 ET30 (3mm spacer upfront); Pirelli Pzero 275/30r20; these rims are really deep concave! Supplied and refinished in matt black centres with gloss black lip by The Prestige Wheel Centre who were excellent as usual. I understand that the CV1s have now been discontinued from the Vossen range.
1784
1785
1783
1786
1787
Shows flush fitting of front wheel/tyre
1788
Vossen CV1s
Vossen CV1s
Last edited by BMW2RS4 on Thu Apr 23, 2015 7:41 am, edited 2 times in total.
B8 RS4 in Daytona Grey
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
Re: Vossen CV1s
That looks awesome 
Re: Vossen CV1s
looks awesome! i'd like a set of those on my B7
Glacier White 2017 S3 Saloon with all the Tech.
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Gone but not forgotten - B7 RS4 Saloon Black - H&R spacers, Tints, Gun Metal Alloys, MRC Stage 2, Pre Cats, Milltek Non Res, K/W Springs, MRC Full Carbon clean - 431ps
previous - B6 A4 1.8T S-Line 215PS
Re: Vossen CV1s
That is some deep ass concavity! Noice, real noice.
No matter where you go, there you are.
Re: Vossen CV1s
Stunning, the whole package.
2nd pic down is the money shot for me
2nd pic down is the money shot for me
Re: Vossen CV1s
I like. Very much.
______________________________________________________
Current: Daytona Grey '14 RS4 Avant +most options
Previous Audis:
Phantom Black '07 B7 S4 Avant Tip
Akoya Silver '03 B6 A4 Avant 3.0 Quattro Tip
Ming Blue '99 B5 A4 Avant 2.8 Quattro Tip
Laser Red '97 8L A3 3dr 1.8T
Assorted junk too embarrassing to list
Current: Daytona Grey '14 RS4 Avant +most options
Previous Audis:
Phantom Black '07 B7 S4 Avant Tip
Akoya Silver '03 B6 A4 Avant 3.0 Quattro Tip
Ming Blue '99 B5 A4 Avant 2.8 Quattro Tip
Laser Red '97 8L A3 3dr 1.8T
Assorted junk too embarrassing to list
Re: Vossen CV1s
Thanks for the positive feedback guys; really appreciate it 
B8 RS4 in Daytona Grey
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
Re: Vossen CV1s
Very nice, the guys at prestige are great!
No rubbing on the 275's?
No rubbing on the 275's?
2016 BMW F80 M3
2014 B8 RS4 - Milltek Non-Res - KW V2's with DRC delete - Setup by Centre Gravity. - Sold
2013 Q5 2.0 Tdi
1997 BMW E36 328i track car
2014 B8 RS4 - Milltek Non-Res - KW V2's with DRC delete - Setup by Centre Gravity. - Sold
2013 Q5 2.0 Tdi
1997 BMW E36 328i track car
Re: Vossen CV1s
Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
B8 RS4 in Daytona Grey
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
Re: Vossen CV1s
All good then, I take it your on the KW lowering springs then? I have the H&R 15-20mm springs and was worried about the potential rubbing from 275's if I go for coilovers.BMW2RS4 wrote:Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
Yours looks perfect at that height!
2016 BMW F80 M3
2014 B8 RS4 - Milltek Non-Res - KW V2's with DRC delete - Setup by Centre Gravity. - Sold
2013 Q5 2.0 Tdi
1997 BMW E36 328i track car
2014 B8 RS4 - Milltek Non-Res - KW V2's with DRC delete - Setup by Centre Gravity. - Sold
2013 Q5 2.0 Tdi
1997 BMW E36 328i track car
Re: Vossen CV1s
Yes, I'm on the KW coilover springs which allow height adjustability but can be used with the DRC. However, lowering is maxed out at both rears and front nearside. I would think that the full coilovers will give a larger range for lowering. BTW, not sure which wheels you are running but the CV1s are ET27 front (including 3mm spacer) and ET30 rear. You could probably go as low as ET25 with the 275s and still avoid rubbing but I would imagine that that is the limit at this ride height.will1981 wrote:All good then, I take it your on the KW lowering springs then? I have the H&R 15-20mm springs and was worried about the potential rubbing from 275's if I go for coilovers.BMW2RS4 wrote:Surprisingly, no rubbing at all even with car set 25mm lower than stock and four adults on board; in fact, there is very little compromise in ride quality & practicality from standard RS4will1981 wrote:Very nice, the guys at prestige are great!
No rubbing on the 275's?
Yours looks perfect at that height!
B8 RS4 in Daytona Grey
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
A1 S line Black Edition (Mrs')
Recent Past:
BMW 325i M Sport Coupe (E92), BMW Alpina D3 (E90), A4 DTM Quattro (B7), BMW M3 (E46)
Re: Vossen CV1s
Very nice look you got there. Maybe that's what has been missing from the B8 for me; lowered with a nice concave wheel.
Who is online
Users browsing this forum: No registered users and 244 guests