RS3 LED Lighting Upgrade pricing.

2.5 I5 20v TFSI - 335 bhp
Post Reply
Trups
Trader (Expired)
Posts: 1316
Joined: Sat Jun 09, 2012 8:38 pm

RS3 LED Lighting Upgrade pricing.

Post by Trups » Sun Feb 17, 2013 9:04 am

HI.

Have had some Pm's about the the lighting in the RS3's so this is a thread i am starting on what can be done to the RS3 as the BCM is very advanced on this car.

CARS WITH FACTORY LIGHT PACK

Interior LED upgrade kit - £59 posted to the uk or NI. In the kit you get:

Front and rear map lights
front dome lights
sunvisors
boot
glove
front footwell
puddle lights x 4
red door lights x 4

Plug and play rear footwell loom, 2 lamps and LED's is £70. This mod can only be done to cars with fitted with the normal sport seats as there is a cut out for the lamp.

CARS WITH NO FACTORY FITTED LIGHT PACK

Interior LED upgrade kit is £29 posted to the uk or NI. In the kit you get:

Front and rear Map lights
Sunvisor lights
Glove and Boot pack

Retro fit stuff - Will require VCDS to code this in

Door loom, red and white lamp - £40, add an extra £10 if you want a loom added onto this to do the ambient door handle light (door handle light is about £33 from Audi)
Front Footwell loom kit is £45
front and rear footwell loom kit is £95

These retro fit lamps do not come with my upgraded LED bulbs so if you wanted to buy them along with the kits then they are £8 per pair of lamps but if buying the whole retro fit kit i can do it for the same price as the factory lamp kit in addition with the extra rear footwell lights.

All error free canbus, The kit i have put together is a nice not in your face kit and the bulbs still allow the car to fade the lighting in and out when locking and unlocking the car. The interior kits are discounted as if you was to get them separate the kit is around £72 so i give a small discount as its a whole kit and this way all bulbs are matching and from 1 seller so if you do happen to have a problem you know where i am.

Lastly the LED number plate lights - Any mod to this will need VCDS coding

I can supply you Canbus LED bulbs for £5 a pair if bought with an interior kit.

The RS3's i have worked on or supplied to i would highly recomened going for the OEM Audi LED number plate lights, they are £33 from me (and Audi) + postage and come with 2 new torx headed screws as the OEM ones round off easy. A

I have been on the ASN forum selling my bulbs for 2 years now so my name on the forum is very well known and i am the go to guy for upgraded bulbs, The bulbs for the puddle lamps, glove, footwell, boot and red doors are custom, alot of testest on this was done before i had a final mould made up. I am not a seller only, i like to get into the thick of it and get to know the product i am selling.

If you have any questions on the Lighting and retro fitting then please ask.

Thanks
Trups
EM Tuning Lighting.
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.

If you have any quieries for interior or exterior LED's then get in touch.

Post Reply

Return to “RS3 (8PA) 2011-2012”

Who is online

Users browsing this forum: No registered users and 95 guests