Rear brake caliper rewind

5.0 V10 50v biturbo - 571 bhp
Post Reply
Noginthenog
Neutral
Posts: 11
Joined: Tue Jun 09, 2009 1:04 pm

Rear brake caliper rewind

Post by Noginthenog » Mon Mar 07, 2011 3:44 pm

Anyone know where I can get a rewind tool for the rear calipers? (has 3 locating lugs instead of 3)

Noginthenog
Neutral
Posts: 11
Joined: Tue Jun 09, 2009 1:04 pm

Re: Rear brake caliper rewind

Post by Noginthenog » Mon Mar 07, 2011 3:51 pm

D'oh!! Should read 3 locating lugs instead of 2!!!

Noginthenog
Neutral
Posts: 11
Joined: Tue Jun 09, 2009 1:04 pm

Re: Rear brake caliper rewind

Post by Noginthenog » Thu Mar 10, 2011 8:05 pm

For those that need to know there is an elctronic tool required to do this as it rewinds via the same motor that winds the caliper out. Not cheap either.

C6NVS
3rd Gear
Posts: 469
Joined: Tue Apr 21, 2009 11:35 pm

Re: Rear brake caliper rewind

Post by C6NVS » Thu Mar 10, 2011 9:19 pm

Do you mean Vag-com, or is there something else?

http://wiki.ross-tech.com/wiki/index.ph ... king_Brake
Daytona C6 RS6 Avant: Demand Engineering Exhaust (Downpipes custom to tip)
Soon to add: Hybrid Turbos; Uprated Gearbox; Marston Intercoolers; ECU / TCU mapping

VARLEYHYD
Neutral
Posts: 8
Joined: Thu Mar 10, 2011 11:56 pm

Re: Rear brake caliper rewind

Post by VARLEYHYD » Fri Mar 11, 2011 9:23 am

Hi!
New member on here

Also to add;
After recent worn rear pads & disc replaced on mine: I am told that if the diagnostics is not reset correctly the low pad thickness warning does not illuminate at all

G

Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 55 guests