Flappy paddle upshift sticking

5.0 V10 50v biturbo - 571 bhp
Post Reply
User avatar
Sonic2505
Neutral
Posts: 17
Joined: Mon Sep 24, 2018 7:24 pm

Flappy paddle upshift sticking

Post by Sonic2505 » Sun Feb 17, 2019 10:37 am

My flappy paddle is stuck in. Any ideas?


Sent from my iPhone using Tapatalk
Top
User avatar
adam88binks
Neutral
Posts: 27
Joined: Fri Sep 08, 2017 7:03 pm

Re: Flappy paddle upshift sticking

Post by adam88binks » Sun Feb 17, 2019 3:16 pm

Sonic2505 wrote:My flappy paddle is stuck in. Any ideas?


Sent from my iPhone using Tapatalk
Probably dirt. Take airbag off and disassemble


Sent from my SNE-LX1 using Tapatalk

Top
Jim Haseltine
4th Gear
Posts: 903
Joined: Mon Jan 04, 2016 2:26 pm

Re: Flappy paddle upshift sticking

Post by Jim Haseltine » Sun Feb 17, 2019 4:30 pm

See viewtopic.php?f=47&t=120828
Top
User avatar
Sonic2505
Neutral
Posts: 17
Joined: Mon Sep 24, 2018 7:24 pm

Re: Flappy paddle upshift sticking

Post by Sonic2505 » Sun Feb 17, 2019 10:34 pm

Jim Haseltine wrote:See viewtopic.php?f=47&t=120828
Cheers fella. Worked a treat.


Sent from my iPhone using Tapatalk
Top
Toady1
3rd Gear
Posts: 363
Joined: Mon Jul 10, 2017 2:13 pm

Re: Flappy paddle upshift sticking

Post by Toady1 » Tue Feb 19, 2019 10:11 pm

By doing this you have moved the broken piece of plastic only, it will likely jam up again. I had the same issue with my down shift paddle. You have to remove the air bag and take the trim off the steering wheel to actually access the bolt holding the paddle in. Then you can remove the paddle, take the pin out and separate the parts to fully remove the broken bit of plastic.

There is a good guide to this on YouTube one a TT.
Top
Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 62 guests