RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Been looking around for new wheel options for quite some time but it is very difficult to find something that are as good or better then the factory 20x9.5" "peelers" I do however think they are becoming a little plain now.
Options are also limited if you have 420mm ceramics and not all 20" inner barrel diameters will clear the ceramics.
I have looked at several options such as a factory 20x10" Q7 wheel but would need to run 15mm 5x130 to 5x112 adaptors and wasn't 100% on trusting a aluminium adapted holding the wheels on.

I have also looked at some Bentley Supersport wheels but these are only a 20x9.5" wheel but looks to clear the 420mm ceramic disks as I believe the Bentley discs share the same part number.
I haven't been able to source a set here in Australia but there are a handful of sets on eBay.de and eBay.com but are priced the same as a custom forged set plus international shipping.

I did find these by random on Google image search.

I did some enquiring and found out the photo above is a set of 22x10.5" Savini BM-7's in a titanium grey finish.
Now a 22" wheel I believe is a bit large but they do make it in a 20x10 and can do custom stud patterns, offsets and PCD. I've also been told they will clear the 420mm discs and calipers.


My RS6 is also Daytona Grey as per the Q7 above so I'm thinking it might go quite well together?
What are your thoughts people?

Your images seem to have broken links. On my iPhone anyway

Looks an OK wheel but the 5 star style wheels tend to suit Beemers and Mercs better. Straight multi-spoke wheels tend to be better on Audis from the nougties.

I'm happy with my 22" Forgestar F14.
Ride quality not affected. Bumps no issues at all.

Ungjaevel wrote:I'm happy with my 22" Forgestar F14.
Ride quality not affected. Bumps no issues at all.

rs6.JPG

looks good. Which spoiler is that?

Ungjaevel wrote:I'm happy with my 22" Forgestar F14.
Ride quality not affected. Bumps no issues at all.

rs6.JPG

Very nice avant you have there Ungjaevel!
My only concern going to a 22" wheels is you would need a pretty low profile tyre, less meat to protect the rim from pot holes......the roads in Brisbane and Sydney aren't that great.

does look very good one 22's mate ! my only worry would be the extra £100 a corner for pilot super sports.
but it may be something i look at at is saves you having to lower the car but give you a good rim to arch ratio

bam_bam wrote:Looks an OK wheel but the 5 star style wheels tend to suit Beemers and Mercs better. Straight multi-spoke wheels tend to be better on Audis from the nougties.

I'm a big fan of the HRE P43sc's (as below) but the budget won't allow for it and I also have a big service coming up soon too.



I did also consider the VMR v702's in a titanium grey.

Spoiler is ILR Carbon.

Fair point with the rims being exposed to curbs/potholes. But we are quite limited in our selection when wanting >20" and having ceramic brakes.

Ungjaevel wrote:Spoiler is ILR Carbon.

Fair point with the rims being exposed to curbs/potholes. But we are quite limited in our selection when wanting >20" and having ceramic brakes.

To fit your 22" wheels what's specs are you running if you don't mind me asking....22x10" with a 265/35 tyre profile?

I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems

Ciscokid_London wrote:I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems

12672119_10153541176331313_1812507389769676104_o.jpg

They look great! Got any more pics side on both front and rear?

Vieussuex* wrote:

Ciscokid_London wrote:I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems

The attachment 12672119_10153541176331313_1812507389769676104_o.jpg is no longer available

They look great! Got any more pics side on both front and rear?

Here you go, they quite deep dish

Ciscokid_London wrote:

Vieussuex* wrote:

Ciscokid_London wrote:I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems

12672119_10153541176331313_1812507389769676104_o.jpg

They look great! Got any more pics side on both front and rear?

Here you go, they quite deep dish TFSI

13062179_10153629589681313_1070098120450676028_n.jpg

12525178_10153568217931313_5538662036638705166_o.jpg

13406741_10153724568251313_8773767613340430117_n.jpg

They sit nicely on the fenders too. Do you mind telling what offset they are?

[quote="Vieussuex*"]

40mm - They clear everything, quite close to the back brake hoses, so make sure they're sitting exactly where they are supposed to be.
I've used 8mm (all around) spacers for shows - it looks the daddy! I don't use the spacers for high end runs and drag racing