Options are also limited if you have 420mm ceramics and not all 20" inner barrel diameters will clear the ceramics.
I have looked at several options such as a factory 20x10" Q7 wheel but would need to run 15mm 5x130 to 5x112 adaptors and wasn't 100% on trusting a aluminium adapted holding the wheels on.
I have also looked at some Bentley Supersport wheels but these are only a 20x9.5" wheel but looks to clear the 420mm ceramic disks as I believe the Bentley discs share the same part number.
I haven't been able to source a set here in Australia but there are a handful of sets on eBay.de and eBay.com but are priced the same as a custom forged set plus international shipping.
I did find these by random on Google image search.
I did some enquiring and found out the photo above is a set of 22x10.5" Savini BM-7's in a titanium grey finish.
Now a 22" wheel I believe is a bit large but they do make it in a 20x10 and can do custom stud patterns, offsets and PCD. I've also been told they will clear the 420mm discs and calipers.
My RS6 is also Daytona Grey as per the Q7 above so I'm thinking it might go quite well together?
What are your thoughts people?