Genuine RS4 B7 Brake Discs - GB***STARTING MON 20TH***

[DazN]

Wonder how these prices will compare to the new Loba setup that's due out this month??

[Timster]

Yeah. I was thinking the same. However, the Loba setup isn't proven yet... is it.

Any news yet klauster ?

[TimDogg]

Things that might encourage a better number of participants are:

- How do I know how worn my disks are? What tool do I buy to measure them? What is the equation to best judge life expectancy based on the thickness of the disk?
- Let's say I wanted someone to fit them, would any of the Site Sponsors be willing to offer a bring your own parts service and what would be the cost of fitting only?
- New disks should be fitted with new pads. Can we get a price including pads from the same vendor?

Can anyone put up min measurements for the discs as Phil T says, do we just use a Halfords micrometer thingy?

Klauster, mate - thanks for doing this.

[DazN]

Fronts are 34.0mm new, 32.0mm Audi recommendation to change. Rears I can't remember off the top of my head but they're something like 22mm new 20mm need replacing.

This all takes into account a lot of tolerance from Audi allowing for uneven wear etc. I read people have run fronts at 30mm with no issues.

If you have no issues braking, no judder, fade etc then do you need to change when Audi say so?

[TimDogg]

Cheers Daz.

[klauster]

Right, most if not all the quotes are back. Some good, some hilarious....

Anyway, I will get back in touch with the company who provided the best quote and will post up the relevant information. It looks like the prices I put up earlier are the best we will get. Just need to check on postage & packaging costs.

The monies will need to be paid directly to the company, preferrably over the phone.

Please drop me a pm if this is going to be an issue for you.

List below is the one I'm working with. Please check your name is down, I am taking your name being on the list as being commited. By not paying or messing the supplier around you may ruin it for the rest of us, so please let me know if you might not go ahead prior to me sorting everything.

1. Klauster - FRONTS
2. RS4blacked - REARS
3. Timster - FRONTS
4. Darren (DazN) - REARS
5. jdp - REARS
6. henryhale2704 - REARS
7. Sonny - REARS
8. Steveyb - BOTH
9. phil3909 = FRONTS
10.Davectr - Fronts (possibly rears as well)
11. TimDogg - BOTH
12. Teknobod - FRONTS
13. macRS4 - REARS

Cheers

[WUZ]

1. Klauster - FRONTS
2. RS4blacked - REARS
3. Timster - FRONTS
4. Darren (DazN) - REARS
5. jdp - REARS
6. henryhale2704 - REARS
7. Sonny - REARS
8. Steveyb - BOTH
9. phil3909 = FRONTS
10.Davectr - Fronts (possibly rears as well)
11. TimDogg - BOTH
12. Teknobod - FRONTS
13. macRS4 - REARS
14. WUZ - Rears

[Timster]

Right, most if not all the quotes are back. Some good, some hilarious....

Anyway, I will get back in touch with the company who provided the best quote and will post up the relevant information. It looks like the prices I put up earlier are the best we will get. Just need to check on postage & packaging costs.

The monies will need to be paid directly to the company, preferrably over the phone.

Please drop me a pm if this is going to be an issue for you.

List below is the one I'm working with. Please check your name is down, I am taking your name being on the list as being commited. By not paying or messing the supplier around you may ruin it for the rest of us, so please let me know if you might not go ahead prior to me sorting everything.

1. Klauster - FRONTS
2. RS4blacked - REARS
3. Timster - FRONTS
4. Darren (DazN) - REARS
5. jdp - REARS
6. henryhale2704 - REARS
7. Sonny - REARS
8. Steveyb - BOTH
9. phil3909 = FRONTS
10.Davectr - Fronts (possibly rears as well)
11. TimDogg - BOTH
12. Teknobod - FRONTS
13. macRS4 - REARS

Cheers

Well done again Klauster.
Don't forget, that with a possible 17 sets of discs you may have a bit more "squeeze" on those prices.
Whoever supplies these is still going to make some decent cash.

Cheers

[klauster]

I'm still squeezing, but to be fair, no one has got near the prices I have secured up to now... will try get free shipping

[sonny]

Nice one fella.

[Chrishumes]

im probably in as in process of buying a car....im guessing these are a better and cheaper option of buying aftermarket ones??

[DazN]

There are no after market ones! Seems only Audi make discs for the RS4 unless you go for the big brake kit by Brembo. Prices Klauster has sorted out are the best I've seen and on that note - I'm in!

[Chrishumes]

Put me down then! What about pads?

[DazN]

I'll be getting my pads from Virdee, a trader on here who has some very good prices on Pagid front and rears.

[DazN]

Do you know when this is going to close so we can order?

Thanks