Lamborghini logo on RNSE?

[EuroSag]

Hi guys,

I have a 2007 B7 RS4 with the DVD sat nav and apparently using vag-com you can program it to show the lambo logo on start-up.

Does anyone have the slightest idea how to do it? I'm absolutely stumped......

[sonny]

why would you?

[Timster]

Yes you can do it... but as sonny says..... "why" ?

[PetrolDave]

You can set the RNS-E on a 2007 RS4 to show RS4 on start-up - much more appropriate than a raging Italian bull.

[pDkALO]

The RossTech wiki is your friend if you really want to give it a go: http://wiki.ross-tech.com/wiki/index.ph ... art_Screen - change the 2nd number in the main coding, and set it (I think) to standard start up screen in channel 18

It's actually a very good quality logo on the later 193 spec (2010+) RNSe, and was a bit of fun (well, for a day, until I put it back to normal), but as the others say, if you have the original RNSe, setting it to the RS4 logo is much more worthwhile

[mark r]

You can't actually do it on a B7 it won't let you change the digit past 3, 1 is std start up screen, 2 is s4. 3 is Rs4.

[mark r]

i was actually wrong here - if you go into radio or nav controller and set make as lambo the symbol comes up on the start screen.

i just reset mine back to RS4