JHM Lightweight flywheel.

[sonny]

I remember driving in an ACS E36 M3 CS with one of these, and what a racket it made. Had to pull off from 1200rpm. So im guessing lightweight flywheels may have changed somewhat over the years.

What do you guys think of this little number by JHM?

I seem to recall reading about this recently on the forum, anyone tried it from here, and do you think it is worth doing?

Lightweight pulleys would go well with the product.

http://jhmotorsports.com/shop/catalog/j ... a7cad37640

Clutch and flywheel package http://jhmotorsports.com/shop/catalog/j ... a7cad37640

[SKG_C63AMG]

I remember driving in an ACS E36 M3 CS with one of these, and what a racket it made. Had to pull off from 1200rpm. So im guessing lightweight flywheels may have changed somewhat over the years.

What do you guys think of this little number by JHM?

I seem to recall reading about this recently on the forum, anyone tried it from here, and do you think it is worth doing?

Lightweight pulleys would go well with the product.

http://jhmotorsports.com/shop/catalog/j ... a7cad37640

Clutch and flywheel package http://jhmotorsports.com/shop/catalog/j ... a7cad37640

i take it ur still on the diet for the motor lol? if u decide for a group buy i could be interested

[sonny]

Yep I have a few ideas kicking about. Getting the car ready for 2012 track action. Aim is to take the car to the next step.

[SKG_C63AMG]

Yep I have a few ideas kicking about. Getting the car ready for 2012 track action. Aim is to take the car to the next step.

well matey if u want some company next year let me know im getting tyres sorted soon with ARB's front and rear and i need some action next year, on track that is lol

[sonny]

Yep I have a few ideas kicking about. Getting the car ready for 2012 track action. Aim is to take the car to the next step.

well matey if u want some company next year let me know im getting tyres sorted soon with ARB's front and rear and i need some action next year, on track that is lol

What about upgrading the wings and bonnet to the RS4 ali ones? might be able to get some from a breaker, this will half the weight down of the original items. However you will compromise on safety.

[SKG_C63AMG]

Yep I have a few ideas kicking about. Getting the car ready for 2012 track action. Aim is to take the car to the next step.

well matey if u want some company next year let me know im getting tyres sorted soon with ARB's front and rear and i need some action next year, on track that is lol

What about upgrading the wings and bonnet to the RS4 ali ones? might be able to get some from a breaker, this will half the weight down of the original items. However you will compromise on safety.

definatley want the saftey thinking of an ali bonnet or even carbon fibre vented and painted not to sure yet. too many decsicions? but i have plenty of time

[sonny]

Agree, So what you reckon about the flywheel then?

[SKG_C63AMG]

Agree, So what you reckon about the flywheel then?

im very tempted for the clutch and fly wheel combo but also the 380mm discs too, was talking to Doug about his set up by a local company to him but he didnt really rate them especially for track, like u say the drilled are more of a headache than anything else, cleaning the holes out, i would much rather have grooved discs and not so bothered about drilled on rear?

[SKG_C63AMG]

just a thought there but not sure how the 380mm discs would go with ur 18" track wheels Sonny, they look quite close with the 19" wheels on? will go nice with my 20" wheels though lol

[sonny]

just a thought there but not sure how the 380mm discs would go with ur 18" track wheels Sonny, they look quite close with the 19" wheels on? will go nice with my 20" wheels though lol

I did look at that and I think they will be fine.

I looked at the Alcon and stoptech set up, but I think the OEM callipers are fantastic, just the discs that need improving.

[SKG_C63AMG]

just a thought there but not sure how the 380mm discs would go with ur 18" track wheels Sonny, they look quite close with the 19" wheels on? will go nice with my 20" wheels though lol

I did look at that and I think they will be fine.

I looked at the Alcon and stoptech set up, but I think the OEM callipers are fantastic, just the discs that need improving.

I agree there the OEM callipers are fine 8 pots are capable of everything just need better discs, im gettine upgraded brake lines and fluid soon so will be good to do discs at the same time, castle combe srs session did my discs front and rear the world of good cleaned them up a treat but still want bigger discs

[sonny]

Sweet, you going for RBF600?

[SKG_C63AMG]

Sweet, you going for RBF600?

yeah will be with goodridge brake lines for good measure

[sonny]

..and DS2500 pads?

[P_G]

If you guys are buying stuff from JHM we may be better doing it in one bulk order to save on shipping costs since Steve and I live fairly close to each other. Even sending the stuff on to you in the UK after arrival on these shores sonny would be cheaper than o/s shipping. I may go for front and rear discs. We may also be able to get a slight discount from JHM on a bulk order too; I've tried in the past for myself and they weren't keen hence why I have never gone for their stuff.