My Rs4 Project
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Re: My Rs4 Project
I know it's a personal taste thing, but having seen your black interior I'm SO glad that I spec'ed the light headlining and interior - the black makes the interior look so small and dark I would get claustrophobic in there.
But you prefer the black, and that's what matters.
But you prefer the black, and that's what matters.
Gone: 2006 B7 RS4 Avant (Phantom Black)
Re: My Rs4 Project
+1. I have the light interior and silver dash inserts - the interior is really quite light - but equally mine is a silver car, so that kinda suits the overall look. I can see the dark interior complimenting the Phantom Black of that's your taste...PetrolDave wrote:...small and dark I would get claustrophobic in there.
Nice work on the switchover - rather you than me!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Re: My Rs4 Project
Thanks. It's only a 2-3 hour job swapping them over. I'm not going to sell the cream as it doesn't sell on ebay so if I fancy a change I can swap back. I was surprised how dirty the cream was when it was out compared to being in the car.
Re: My Rs4 Project
loving the inside, I just always assumed they were all the same!
Re: My Rs4 Project
ive done a few bits yesterday nothing very exciting but thought i would get it done,
saturday was so hot compared to today, such a shame
i decided to wrap the entire exhaust in titanium heat wrap, ive been reading up on this and it may only be minimal but any gain is a gain, hot gas flows quicker so i thought i wrap the entire exhaust downpipe back.
and most boring ive changed the coolant resevoir
ive done a bit more carbon but thats work in progress
saturday was so hot compared to today, such a shame
i decided to wrap the entire exhaust in titanium heat wrap, ive been reading up on this and it may only be minimal but any gain is a gain, hot gas flows quicker so i thought i wrap the entire exhaust downpipe back.
and most boring ive changed the coolant resevoir
ive done a bit more carbon but thats work in progress
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: My Rs4 Project
Love the head liner update, nice and snug.
Please tell me you had access to a ramp for the exhaust wrap as that wouldn't have been fun doing it from axle stands.
Please tell me you had access to a ramp for the exhaust wrap as that wouldn't have been fun doing it from axle stands.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: My Rs4 Project
Surrey Sam wrote:Love the head liner update, nice and snug.
Please tell me you had access to a ramp for the exhaust wrap as that wouldn't have been fun doing it from axle stands.
thanks i prefer the interior, but craving more now, i really like the suede and stitched dashboard on the modified cars out there
i would never work under a car on axel stands, i used my local garages pit to do it as it takes ages to thread it over and over,
you can just see some ramps i made out of 10 x2 then the car cannot drop down as its already down, only use these to get the jack under and used last week when i changed the fuel filter.
Re: My Rs4 Project
i decided to add a touch more carbon to the rear of the car by wrapping the tail pipes, they have a space between and dont touch the tip directly andd have a space all the way round
i also made a custom cai a while back after removing the aux rad and sai pump, its the largest feed possible,
i removed the old scoop for the aux rad and added a fiberglass scoop to it.
i can get my whole arm in and up to the filter
I also attended a rolling road day on saturday , heres a couple of rolling shots on the way
so after an early morning start and a drive out to the middle of nowhere i was strapped sown and ready to go
heres the vid
http://vimeo.com/104852007
it made 415 ps and 311 lbs-ft
which im pretty happy with as its yet to have a remap, just still undecided yet
i also made a custom cai a while back after removing the aux rad and sai pump, its the largest feed possible,
i removed the old scoop for the aux rad and added a fiberglass scoop to it.
i can get my whole arm in and up to the filter
I also attended a rolling road day on saturday , heres a couple of rolling shots on the way
so after an early morning start and a drive out to the middle of nowhere i was strapped sown and ready to go
heres the vid
http://vimeo.com/104852007
it made 415 ps and 311 lbs-ft
which im pretty happy with as its yet to have a remap, just still undecided yet
Re: My Rs4 Project
Dude your car looks awesome in all those photos!
Re: My Rs4 Project
Mean Rick. Looks real mean. The rear shot on the rollers looks very stealth!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Re: My Rs4 Project
Faaaaaaark seeing that in the rear view coming up thick n fast
As mentioned, mean as hell, love it
As mentioned, mean as hell, love it
Instagram : n_i_l_s
Re: My Rs4 Project
Thanks chaps. Really happy with it at the minute. Just thinking of the next project really.
Not that I'm a fast lane masher but when you want to go people do move out the way pretty sharpish, unlike our mini coupe.
Not that I'm a fast lane masher but when you want to go people do move out the way pretty sharpish, unlike our mini coupe.
Re: My Rs4 Project
Love this look.
I plasti-dipped all my optics and just remvoed them as I want to get them wrapped properly and my handywork wasnt 100%!
I plasti-dipped all my optics and just remvoed them as I want to get them wrapped properly and my handywork wasnt 100%!
Re: My Rs4 Project
edge wrote:Love this look.
I plasti-dipped all my optics and just remvoed them as I want to get them wrapped properly and my handywork wasnt 100%!
Thanks.
I thought the matte black looked good on yours. Made the grille stand out
Who is online
Users browsing this forum: lugars4 and 152 guests