My Rs4 Project
My Rs4 Project
Ive been busy this weekend,
removed aux rad, removed all silver trim, removed mirrors for spraying, de tango'd the corner markers, and made a custom cold air intake.
removed aux rad, removed all silver trim, removed mirrors for spraying, de tango'd the corner markers, and made a custom cold air intake.
Re: My Rs4 Project
Good work there Rick. Just one question, have you blocked off the whole of the front intake, if so this may effect the break cooling as the duct takes its air feed from here
Money can't buy you love, but it can buy you a well sorted racecar
Re: My Rs4 Project
sonny wrote:Good work there Rick. Just one question, have you blocked off the whole of the front intake, if so this may effect the break cooling as the duct takes its air feed from here
cheers, the brake cooling ducts are fed from the vent scoops in the undertray
Re: My Rs4 Project
ok thought it was taking from the duct. Will take your word for it.
So did you remove the airbox flap ?
So did you remove the airbox flap ?
Money can't buy you love, but it can buy you a well sorted racecar
Re: My Rs4 Project
nothing there
yeah flap removed and vac pipe bunged up, still left solonoid in just incase it throws a code.
yeah flap removed and vac pipe bunged up, still left solonoid in just incase it throws a code.
Re: My Rs4 Project
Have you took it for a test drive yet, if so notice a difference?
Money can't buy you love, but it can buy you a well sorted racecar
Re: My Rs4 Project
not driven it yet, im waiting for the wing mirrors to get back from the sprayers.
Re: My Rs4 Project
what you having done?
Money can't buy you love, but it can buy you a well sorted racecar
Re: My Rs4 Project
mirrors body coloured, and then wheels done when the new tyres arrive.sonny wrote:what you having done?
Re: My Rs4 Project
Nice one. I was tempted to do the same to my cold air feed, the naca style ducting will give you the very best of rammed air, giving me ideas!
Money can't buy you love, but it can buy you a well sorted racecar
Re: My Rs4 Project
i didnt do any logs before but ill log inlet temps and inlet g/s in a couple of daysto see if its made much difference, for a 3rd forced inlet could be made to the one that goes backwards down the wing.sonny wrote:Nice one. I was tempted to do the same to my cold air feed, the naca style ducting will give you the very best of rammed air, giving me ideas!
Re: My Rs4 Project
thanks Jules.
bit of an update
went to a rolling road day, had a great day but not so great on power managed 381bhp (this was before CAF mod) heres a couple of pics that a mate took.
i fitted an A8 rear 'ring' badge as the standard one looks a little small and lost on the boot.
since then i sent the mirrors off to paint, theyre back now and on the car, I have wrapped the centre caps black to match the wheels
the wheels have been acid bathed and powdercoated high gloss black and fitted with new vredesteins
heres a teaser pic of it all back together, to say im pleased with it is an understatement, it looks so mean now.
will get some better pics in the week
bit of an update
went to a rolling road day, had a great day but not so great on power managed 381bhp (this was before CAF mod) heres a couple of pics that a mate took.
i fitted an A8 rear 'ring' badge as the standard one looks a little small and lost on the boot.
since then i sent the mirrors off to paint, theyre back now and on the car, I have wrapped the centre caps black to match the wheels
the wheels have been acid bathed and powdercoated high gloss black and fitted with new vredesteins
heres a teaser pic of it all back together, to say im pleased with it is an understatement, it looks so mean now.
will get some better pics in the week
Re: My Rs4 Project
You have been busy Rick, cars coming on nicely.
Where is that rolling road?
Where is that rolling road?
Money can't buy you love, but it can buy you a well sorted racecar
Who is online
Users browsing this forum: Google Adsense [Bot] and 101 guests