pauly-b wrote:Dave - If you don't mind me asking how difficult / expensive was retrofitting the cool glove box? Definately interested in doing this myself.
There's two ways, both easy - just add the cool air vent into the standard glove box, or add the inner compartment as well. I went for the inner compartment as well.
The parts came from Southampton Audi (great parts guys, but weak service guys):
8E2 816 311 air hose £4.67 + VAT
8E0 820 701 4PK air outlet £12.38 + VAT
Plus if you add the cool box insert:
8E2 862 807 A 6PS cool box insert £58.89 + VAT
8E0 947 415 light £5.60 + VAT
N 909 365 01 screw 3 off £0.63 + VAT
N 017 752 2 bulb £0.47 + VAT
If you just do the outlet it's a case of drop the glove box, push out the removable section wwhere the outlet goes, pull out the bung in the side of the HVAC and throw it away, fit the hose, refit the glove box and screw on the outlet.
If you fit the insert then you have to cut a new rectangular hole for the glove box light , but it's only thin plastic so it's easy enough.