Does anyone have any recommendations? Having had badly balanced or scratched wheels on more than one occasion, I'm happy to travel for a good job - especially with the sensors to contend with
Also, I'll be providing my own Sessantas which I bought last year, and have heard that some places only fit tyres they've provided themselves - any substance in this?
Thanks
Good tyre fitter - West London (ish)
Good tyre fitter - West London (ish)
2007 Daytona RS4 Avant
RE: Good tyre fitter - West London (ish)
You could try Munster Tyres in Fulham ( http://www.munstertyres.biz/Welcome.aspx ). They've always seemed fairly competent to me. They're also Vredestein main dealers so they may be more amenable to fitting the Sessantas. Can't see why they wouldn't fit your own tyres for a fee.........
Being a bit paranoid about anybody going near my cars I tend to stand over the fitters - nagging about correct torques & sensors etc. but, they seem OK.
Good luck.
Being a bit paranoid about anybody going near my cars I tend to stand over the fitters - nagging about correct torques & sensors etc. but, they seem OK.
Good luck.
"It will never have enough power until I can spin the wheels at the end of the straightaway in high gear."
Mark Donohue on the 1,580bhp Porsche 917-30
Mark Donohue on the 1,580bhp Porsche 917-30
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: Good tyre fitter - West London (ish)
Waiting with popcorn on replies for this, as I'd like to know too!
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
I used to use this place;
http://www.alloywheelrefurb.co.uk/page3.html
Albeit some 6 years ago I used them when I was in London for 5 years and had decent cars. As they do the alloy repairs they are good a fitting without scratching up to 24" rims IIRC.
Never used to be precious about bringing your own tyres if you were a regular customer of their valet or alloy centre.
http://www.alloywheelrefurb.co.uk/page3.html
Albeit some 6 years ago I used them when I was in London for 5 years and had decent cars. As they do the alloy repairs they are good a fitting without scratching up to 24" rims IIRC.
Never used to be precious about bringing your own tyres if you were a regular customer of their valet or alloy centre.
-
- Trader (Expired)
- Posts: 18
- Joined: Sun Mar 19, 2006 9:31 am
- Location: Iver Bucks
- Contact:
Try Monty's Wheels and Tyres in Iver
http://www.montyswheelsandtyres.com/def ... echeck=yes&
We have used them for years. They are a nice small company who have been around for years. They won't scratch your wheels and will fit your own tyres properly. Give Paul (The owner) or Justin a call.
http://www.montyswheelsandtyres.com/def ... echeck=yes&
We have used them for years. They are a nice small company who have been around for years. They won't scratch your wheels and will fit your own tyres properly. Give Paul (The owner) or Justin a call.
Who is online
Users browsing this forum: dan32v, Google [Bot] and 119 guests