Page 1 of 1
KW V3 Setup
Posted: Sat Feb 08, 2025 10:58 pm
by cbock
I will be replacing DRC with KW V3s next week. Car already has front and rear Hotchkis sways. Can anyone point me to threads talking about known good setups? I would like to get a good baseline quickly and then make adjustments to my preferences. Thanks!
Re: KW V3 Setup
Posted: Tue Feb 11, 2025 9:04 am
by MTBear
Re: KW V3 Setup
Posted: Thu Feb 13, 2025 9:34 am
by delroyx
The standard setting out the box are pretty good & set up for the car.
Ride height can be fairly easily adjusted afterwards if needed. They will settle a bit after first install so probably best to install a little bit high.
Re: KW V3 Setup
Posted: Fri Feb 14, 2025 8:06 pm
by Zyox
delroyx wrote: ↑Thu Feb 13, 2025 9:34 am
They will settle a bit after first install so probably best to install a little bit high.
Whatever you pick please remember this. Crunched my front splitter off of a footpath while parking many years ago just a week or so after having fitted Bilsteins and the front had sunk/settled down. Can still hear the noise
Re: KW V3 Setup
Posted: Mon Feb 17, 2025 7:46 pm
by cbock
Thanks all! Appreciate the help.