Page 1 of 2

Brake overhaul

Posted: Sat Jan 28, 2017 11:33 pm
by Harris.
Hi all

Have any of you overhauled your brake calipers ? I'm going to a place on Monday to see if they can skin my rear discs as there is no lip on them at all , they are rusty from sitting and don't clean up to well after being driven . Are the rear brakes a little lazy? They quote on there website £55 per disc which seems a good deal .they mainly deal with Porsches but also do Audi's

My front discs are now on there last legs so I'll order some new ones along with pads all round

I'd like to remove the calipers why the above is being done to clean them up and repaint them, do I need to clamp all the hoses or can I let all the fluid run out and replace with fresh fluid after. Silly question to some I know but I've never removed them .

Any help or advice would be good and maybe some pictures of your brakes after a re paint?

Thanks

Re: Brake overhaul

Posted: Sun Jan 29, 2017 2:09 am
by MikeFish
All my discs were really rusty from lack of use and washing then not using. I took it out for a run up and down the dual carriageway with a few roundabouts and all 4 discs were super shiny afterwards. If they are still rusty after a drive then there may be something wrong with them.

Re: Brake overhaul

Posted: Sun Jan 29, 2017 2:16 am
by Eddie555
MikeFish wrote:All my discs were really rusty from lack of use and washing then not using. I took it out for a run up and down the dual carriageway with a few roundabouts and all 4 discs were super shiny afterwards. If they are still rusty after a drive then there may be something wrong with them.
Not everyone drives as FURIOUSLY as you Mike. Duh.

Re: Brake overhaul

Posted: Sun Jan 29, 2017 2:29 am
by MikeFish
Eddie555 wrote:
MikeFish wrote:All my discs were really rusty from lack of use and washing then not using. I took it out for a run up and down the dual carriageway with a few roundabouts and all 4 discs were super shiny afterwards. If they are still rusty after a drive then there may be something wrong with them.
Not everyone drives as FURIOUSLY as you Mike. Duh.
Ha ha true, I furiously scrubbed those rear discs.

Re: Brake overhaul

Posted: Sun Jan 29, 2017 2:33 pm
by Lukes3
I have overhauled my calipers myself, easy enough job. I brought the new seals an dust seals from a supplier off ebay, genuine brembo seals. Once you have the seals out the part numbers are on them. There not cheap though.
Not sure how far you would like to go with them.
I clamped my hose then fitted braided lines once calipers were ready to refit.

Re: Brake overhaul

Posted: Sun Jan 29, 2017 2:43 pm
by Lukes3
Image
Image
Image
Image

Re: Brake overhaul

Posted: Sun Jan 29, 2017 6:12 pm
by Harris.
Great job , mine need that treatment .

Re: Brake overhaul

Posted: Sun Jan 29, 2017 8:24 pm
by Shinobi675
Where did you get them painted?

Re: Brake overhaul

Posted: Sun Jan 29, 2017 9:31 pm
by Lukes3
My work mate.

Re: Brake overhaul

Posted: Sun Jan 29, 2017 10:03 pm
by Harris.
Where abouts are you based mate ?

I've been quoted £180 for both fronts in any colour along with new seals etc

Re: Brake overhaul

Posted: Sun Jan 29, 2017 10:30 pm
by mongo
Harris. wrote:Where abouts are you based mate ?

I've been quoted £180 for both fronts in any colour along with new seals etc
wheres that from Harris?

Re: Brake overhaul

Posted: Mon Jan 30, 2017 9:34 am
by Harris.
http://www.brakecaliperspecialists.uk/b ... nt/brembo/

These guys , have a very nice colour range too

Re: Brake overhaul

Posted: Mon Jan 30, 2017 9:49 pm
by MikeFish
Harris. wrote:http://www.brakecaliperspecialists.uk/b ... nt/brembo/

These guys , have a very nice colour range too
Their website says they have 10% off in january too, but you've only got a day left!
Website says £182 for 2x 8 pot calipers, so that would be £18 off that.

Re: Brake overhaul

Posted: Mon Jan 30, 2017 9:52 pm
by Harris.
Yeah I see that Mike, mine are still on the car as I didn't get time to remove them today .

I like the orange they do ,it will go nice with the black :rocker:

Re: Brake overhaul

Posted: Mon Feb 06, 2017 7:50 pm
by Cbardell
Where did you get the RS logos from to replace?