Carbon parts from Dubai interest

4.2 V8 32v Naturally Aspirated - 414 bhp
User avatar
docurley
5th Gear
Posts: 1215
Joined: Fri Oct 01, 2004 8:31 am
Location: London

Carbon parts from Dubai interest

Post by docurley » Wed Jan 04, 2017 11:57 pm

So over two or three threads you are aware that we are expecting some parts to be made in carbon fibre from Dubai, and thought it would be good if we had one thread on the subject.

I have personly sent some parts over so the parts can be made (I'm not a supplier or seller and am not making any money just so we are clear) at my own expense.

What I propose is for people to add their interest to what items they would like (obvious cost being a factor) by taking the whole list and adding your interest to each part on the list.

There may be more parts in the making so will add as we go along and hopefully will push the time line for different parts.

What I know is in the pipe line.

Rear diffuser: Doc,
Front Splitter: Doc,
Wing Mirrors: Doc,
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc,

Just cut and past the list from the last person so we can gauge the interest so that we get these parts made.
Avus Audi RS4 2076|Black optic |Carbon Airbag surround|LED'S inside|RNS-E style Android Stereo with DAB+ dongle|

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: Carbon parts from Dubai interest

Post by pule333 » Thu Jan 05, 2017 12:29 am

I am down for rear Diffuser. Maybe other bits depending on prices etc.

Also would be interested in Audi rings, especially the fronts if any at all in the pipe line ;)
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: Carbon parts from Dubai interest

Post by pule333 » Thu Jan 05, 2017 12:31 am

Rear diffuser: Doc, pule333,
Front Splitter: Doc, pule333,
Wing Mirrors: Doc,
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc,
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
eliano
2nd Gear
Posts: 172
Joined: Thu Dec 17, 2015 11:29 pm

Re: Carbon parts from Dubai interest

Post by eliano » Thu Jan 05, 2017 12:33 am

Rear diffuser: Doc, pule333,
Front Splitter: Doc, pule333,
Wing Mirrors: Doc, eliano
Steering Wheel (Silver parts) exchange: Doc, eliano
Carbon fibre intake kit: Doc,

Mirrors and steering wheel (as you said cost dependant) :thumbs:
Last edited by eliano on Thu Jan 05, 2017 12:35 am, edited 1 time in total.
RS4 B7 Saloon, Phantom Black , Billy B14 and ss+ arbs, LED's all inside & out with Dectane LED tailights. deflap, MRC Stage 2, Carbon Clean, no pre-cats, Custom Blueflame non res cat back exhaust, AP Racing Discs, alcantara wheel, gaiter and handbrake retrim, R8 gearknob, red belts (anyone want to swap belts for black ;-/ ) 438PS

Nickygrs4
Neutral
Posts: 10
Joined: Mon Nov 07, 2016 11:15 pm

Re: Carbon parts from Dubai interest

Post by Nickygrs4 » Thu Jan 05, 2017 12:34 am

diffuser: Doc, pule333, Nickygrs4
Front Splitter: Doc, pule333, Nickygrs4
Wing Mirrors: Doc,
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc,

rickster147
3rd Gear
Posts: 378
Joined: Thu Feb 13, 2014 10:42 pm

Re: Carbon parts from Dubai interest

Post by rickster147 » Thu Jan 05, 2017 8:11 am

diffuser: Doc, pule333, Nickygrs4 rickster147
Front Splitter: Doc, pule333, Nickygrs4
Wing Mirrors: Doc, rickster147
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc
Rs4 b7 In avus silver with b14 Bilstein coilovers, centre resonator delete with x pipe and piggie cats gutted
Headlights detangoed trups led kit drl reverse and numberplate kit

Previous audi
rs6 c5 - mrc stage 2 remap-itg filters-forge dumpers-center decat with miltek kw coilovers- h and r
I call her the growler lol

Rw@@dy
4th Gear
Posts: 724
Joined: Sun Oct 13, 2013 5:22 pm

Re: Carbon parts from Dubai interest

Post by Rw@@dy » Thu Jan 05, 2017 8:34 am

rickster147 wrote:diffuser: Doc, pule333, Nickygrs4 rickster147, Rw@@dy
Front Splitter: Doc, pule333, Nickygrs4
Wing Mirrors: Doc, rickster147
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc

Sent from my iPad using Tapatalk

jonytek
5th Gear
Posts: 1066
Joined: Thu Jun 30, 2016 8:58 am
Location: London

Re: Carbon parts from Dubai interest

Post by jonytek » Thu Jan 05, 2017 8:47 am

What about looking into making replacement engine covers to swap out the old yellow ones?

Why would you try and engineer an intake kit when there is already a cheaper option from Pipercross?
RS4 B7 - PLUSH BUILT | MRC WORKED
BUILD THREAD
IG: @bad_rs_4

Image

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Carbon parts from Dubai interest

Post by Lukes3 » Thu Jan 05, 2017 10:10 am

rickster147 wrote:
diffuser: Doc, pule333, Nickygrs4 rickster147, Rw@@dy, lukes3
Front Splitter: Doc, pule333, Nickygrs4
Wing Mirrors: Doc, rickster147, lukes3
Steering Wheel (Silver parts) exchange: Doc,
Carbon fibre intake kit: Doc, lukes3
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
eliano
2nd Gear
Posts: 172
Joined: Thu Dec 17, 2015 11:29 pm

Re: Carbon parts from Dubai interest

Post by eliano » Thu Jan 05, 2017 10:50 am

rickster147 wrote:
diffuser: Doc, pule333, Nickygrs4 rickster147, Rw@@dy, lukes3
Front Splitter: Doc, pule333, Nickygrs4
Wing Mirrors: Doc, rickster147, lukes3, eliano
Steering Wheel (Silver parts) exchange: Doc, eliano
Carbon fibre intake kit: Doc,lukes3
RS4 B7 Saloon, Phantom Black , Billy B14 and ss+ arbs, LED's all inside & out with Dectane LED tailights. deflap, MRC Stage 2, Carbon Clean, no pre-cats, Custom Blueflame non res cat back exhaust, AP Racing Discs, alcantara wheel, gaiter and handbrake retrim, R8 gearknob, red belts (anyone want to swap belts for black ;-/ ) 438PS

Rw@@dy
4th Gear
Posts: 724
Joined: Sun Oct 13, 2013 5:22 pm

Re: Carbon parts from Dubai interest

Post by Rw@@dy » Thu Jan 05, 2017 12:20 pm

jonytek wrote:What about looking into making replacement engine covers to swap out the old yellow ones?

Why would you try and engineer an intake kit when there is already a cheaper option from Pipercross?
Like the idea of replacement engine covers, also what about the right hand side washer bottle cover

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Carbon parts from Dubai interest

Post by Lukes3 » Thu Jan 05, 2017 12:57 pm

Rw@@dy wrote:
jonytek wrote:What about looking into making replacement engine covers to swap out the old yellow ones?

Why would you try and engineer an intake kit when there is already a cheaper option from Pipercross?
Like the idea of replacement engine covers, also what about the right hand side washer bottle cover


+1 to this ^^^^^
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Carbon parts from Dubai interest

Post by MikeFish » Thu Jan 05, 2017 1:02 pm

Rw@@dy wrote:
jonytek wrote:What about looking into making replacement engine covers to swap out the old yellow ones?

Why would you try and engineer an intake kit when there is already a cheaper option from Pipercross?
Like the idea of replacement engine covers, also what about the right hand side washer bottle cover
Pipercross didn't make it, site sponsors Revolution had the carbon air intake made and used a Pipercross air filter.
You can see the Revolution intake and the right hand side engine cover in the photo below:

Image[/URL]

Rw@@dy
4th Gear
Posts: 724
Joined: Sun Oct 13, 2013 5:22 pm

Re: Carbon parts from Dubai interest

Post by Rw@@dy » Thu Jan 05, 2017 1:03 pm

I've got a spare right hand side engineer cover if required, the fixing has a broke and has been glued back together

User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: Carbon parts from Dubai interest

Post by Jules » Thu Jan 05, 2017 3:44 pm

When doing any engine covers at all if parts are being skinned the heat will be an issue.
I was the first to do them all and some seemed to hold out better than others I even did the scuttle panel :roll:

I would be interested in the side back trims of the front seats, and then the steering wheel silver parts a diffuser and possible front
splitter
Drive low,park lower

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 405 guests