RS Steering Wheel badge Option

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
docurley
5th Gear
Posts: 1215
Joined: Fri Oct 01, 2004 8:31 am
Location: London

RS Steering Wheel badge Option

Post by docurley » Wed Jan 04, 2017 10:55 pm

If you are after a badge for the steering wheel I have found a cheap option but not perfect replacement due to design but the shape is spot on.

http://geek.wish.com/c/57a385e93a22883dbf0c1da5


Image
Image
Avus Audi RS4 2076|Black optic |Carbon Airbag surround|LED'S inside|RNS-E style Android Stereo with DAB+ dongle|

User avatar
eliano
2nd Gear
Posts: 172
Joined: Thu Dec 17, 2015 11:29 pm

Re: RS Steering Wheel badge Option

Post by eliano » Sat Jan 07, 2017 3:41 pm

Interesting, does it sit flush ? As theres a knobbly bit behind, anyway there a lot cheaper on aliexpress (bought lots of here and very reliable)


http://s.aliexpress.com/3yi6RFJ7
RS4 B7 Saloon, Phantom Black , Billy B14 and ss+ arbs, LED's all inside & out with Dectane LED tailights. deflap, MRC Stage 2, Carbon Clean, no pre-cats, Custom Blueflame non res cat back exhaust, AP Racing Discs, alcantara wheel, gaiter and handbrake retrim, R8 gearknob, red belts (anyone want to swap belts for black ;-/ ) 438PS

User avatar
docurley
5th Gear
Posts: 1215
Joined: Fri Oct 01, 2004 8:31 am
Location: London

Re: RS Steering Wheel badge Option

Post by docurley » Sat Jan 07, 2017 10:17 pm

Did not see them there but cool, they sit recessed and they double sided tape so either trim off the notch or just stick them down on top.
Last edited by docurley on Sun Jan 08, 2017 3:13 am, edited 1 time in total.
Avus Audi RS4 2076|Black optic |Carbon Airbag surround|LED'S inside|RNS-E style Android Stereo with DAB+ dongle|

User avatar
eliano
2nd Gear
Posts: 172
Joined: Thu Dec 17, 2015 11:29 pm

Re: RS Steering Wheel badge Option

Post by eliano » Sun Jan 08, 2017 1:04 am

Wondering if it could just stick over the existing badge also without removing ? Clearly these are not tempting the purist here but a great option other than changing the lot at a massive expense for a little badge..... tempted to get the airfix paints out haha
RS4 B7 Saloon, Phantom Black , Billy B14 and ss+ arbs, LED's all inside & out with Dectane LED tailights. deflap, MRC Stage 2, Carbon Clean, no pre-cats, Custom Blueflame non res cat back exhaust, AP Racing Discs, alcantara wheel, gaiter and handbrake retrim, R8 gearknob, red belts (anyone want to swap belts for black ;-/ ) 438PS

markwm
3rd Gear
Posts: 257
Joined: Thu May 04, 2006 11:45 am

Re: RS Steering Wheel badge Option

Post by markwm » Tue Jan 17, 2017 9:22 pm


User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS Steering Wheel badge Option

Post by Jules » Wed Jan 18, 2017 12:33 pm

Not sure if I'm being stupid, but I didn't seem to be able to choose the rs one, and it was showing
pics of different badges so didn't order :roll:
Drive low,park lower

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: RS Steering Wheel badge Option

Post by Lukes3 » Wed Jan 18, 2017 6:30 pm

Just off topic a little, but with s button n the wheel that we all know starts to wear an is silly money to replace,
Has anyone looked in to 3D printing that part on its own? I have thought about it but not stripped a wheel down as of yet to see if it could be done.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
eliano
2nd Gear
Posts: 172
Joined: Thu Dec 17, 2015 11:29 pm

Re: RS Steering Wheel badge Option

Post by eliano » Wed Jan 18, 2017 7:34 pm

Even a high quality sticker of some kind would work id imagine, no one seems to have done it yet that ive seen anyway
Lukes3 wrote:Just off topic a little, but with s button n the wheel that we all know starts to wear an is silly money to replace,
Has anyone looked in to 3D printing that part on its own? I have thought about it but not stripped a wheel down as of yet to see if it could be done.
RS4 B7 Saloon, Phantom Black , Billy B14 and ss+ arbs, LED's all inside & out with Dectane LED tailights. deflap, MRC Stage 2, Carbon Clean, no pre-cats, Custom Blueflame non res cat back exhaust, AP Racing Discs, alcantara wheel, gaiter and handbrake retrim, R8 gearknob, red belts (anyone want to swap belts for black ;-/ ) 438PS

Jacko88
Neutral
Posts: 21
Joined: Tue Mar 29, 2016 7:03 pm

Re: RS Steering Wheel badge Option

Post by Jacko88 » Thu Jan 19, 2017 8:22 pm

I wish I'd seen this before I spent £50 on an original one :bash:

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], RS4-Guy and 429 guests