Holtys rs4 b7 build thread

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Nov 28, 2016 1:14 pm

Hi everyone just starting my own build tread on my rs4.
The car is going to need new brakes new suspension & the paint work sorting to get it looking show room.
Will keep the tread up dated as work gets carried out :)
Attachments
image.png
image.png
image.jpeg
Top
User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Holtys rs4 b7 build thread

Post by MikeFish » Mon Nov 28, 2016 1:24 pm

Ooooo new build thread!

Looks good; black with black optics is always a winner.
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Nov 28, 2016 1:57 pm

MikeFish wrote:Ooooo new build thread!

Looks good; black with black optics is always a winner.
Cheers mate, when it's all done it'll look quality.
Top
MrHilario
5th Gear
Posts: 1020
Joined: Thu Oct 08, 2015 4:21 pm

Re: Holtys rs4 b7 build thread

Post by MrHilario » Mon Nov 28, 2016 2:39 pm

Good luck with the build! But my neck is now sore from looking at those pics :lol:
Real name: Simon, or Si, don't mind either

1.4 Fiesta (Silver)
2.8 VW Bora V6 4motion (Blue)
4.2 Audi RS4 B7 Avant (Black)
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: Holtys rs4 b7 build thread

Post by Jules » Mon Nov 28, 2016 3:22 pm

MrHilario wrote:Good luck with the build! But my neck is now sore from looking at those pics :lol:
I was just going to say the same lol.

Car looks well mate
Drive low,park lower
Top
User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: Holtys rs4 b7 build thread

Post by Covkiller » Mon Nov 28, 2016 3:45 pm

Good luck, I know 4 wheel drive holds the road but any RS4 that can stick to a vertical car park is worth investing in.
:biggrin3:
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Nov 28, 2016 6:46 pm

Haha I know it's odd the pics came out vertical
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Tue Nov 29, 2016 9:46 pm

Nice bit of car porn to come home to :biggrin3:
Attachments
image.jpeg
image.jpeg
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Dec 05, 2016 8:37 pm

Got my bilstein b14's :jump:
Attachments
image.jpeg
Top
User avatar
Starry
4th Gear
Posts: 777
Joined: Fri Jul 15, 2016 9:42 pm

Re: Holtys rs4 b7 build thread

Post by Starry » Mon Dec 05, 2016 8:42 pm

Holtyrs4 wrote:Got my bilstein b14's :jump:
Mine came today also.... they must of made a new batch. :blackrs4:
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Image
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Dec 05, 2016 9:11 pm

Starry wrote:
Holtyrs4 wrote:Got my bilstein b14's :jump:
Mine came today also.... they must of made a new batch. :blackrs4:
Demon tweeks by any chance mate? :beerchug:
Top
User avatar
Starry
4th Gear
Posts: 777
Joined: Fri Jul 15, 2016 9:42 pm

Re: Holtys rs4 b7 build thread

Post by Starry » Mon Dec 05, 2016 9:17 pm

No mate, got mine from a Sponsor on here. Revolution,. top guys.... :thumbs:
When you fitting yours?
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Image
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Dec 05, 2016 9:33 pm

Starry wrote:No mate, got mine from a sponsor on here. Revolution,. top guys.... :thumbs:
When you fitting yours?
Ahh right happy days, I get my car back from the detailers on the 15th so probably going to get them on the following Saturday. Has your drc bin playing up?
Top
User avatar
Starry
4th Gear
Posts: 777
Joined: Fri Jul 15, 2016 9:42 pm

Re: Holtys rs4 b7 build thread

Post by Starry » Mon Dec 05, 2016 9:48 pm

I bought a set of the KW adjustable springs as i wanted to retain the DRC but once i got it up on the ramp to fit them i saw one of the shocks was weeping a little so thought it would make sense to bin the lot and go with coilovers.
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Image
Top
Holtyrs4
Neutral
Posts: 31
Joined: Sun Jun 26, 2016 9:44 pm

Re: Holtys rs4 b7 build thread

Post by Holtyrs4 » Mon Dec 05, 2016 11:40 pm

Fair enough mate, mine knackered it's knocks loads. Easy solution coilovers :biggrin3:
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 149 guests