Gloss black grille?
Gloss black grille?
Hey!
My front bumper is going into the paint Shop in a few weeks aswell as the frame from the grill. I was having this thought painting the grille gloss black aswell, but im not sure if it would look any good. Did anyone do this? Any pictures around?
My front bumper is going into the paint Shop in a few weeks aswell as the frame from the grill. I was having this thought painting the grille gloss black aswell, but im not sure if it would look any good. Did anyone do this? Any pictures around?
Audi RS4 Avant
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
Re: Gloss black grille?
Someone has done it before and I thought it looked good, can't remember who though. But if it was me I would have the fog light grilles sprayed to match too.
Re: Gloss black grille?
I've got an RS6 grille in gloss black put in place of mine. Removes hideous plinth in the middle. Parking sensors were relocated in the bumper. Fog light grilles are also sprayed on mine too
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: Gloss black grille?
Sounds very nice. Do you have some pictures ?DavidRS4 wrote:I've got an RS6 grille in gloss black put in place of mine. Removes hideous plinth in the middle. Parking sensors were relocated in the bumper. Fog light grilles are also sprayed on mine too
Where do you put your registration plate if the middle thing is gone?
Audi RS4 Avant
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
Re: Gloss black grille?
Mines all painted gloss black and grills and I think it looks really well
Drive low,park lower
Re: Gloss black grille?
I have cut some diamond pieces of wood that fit through the grill and then twist 90 degrees to lock the plate in place. There's foam behind the plate to stop it rubbing against the grill.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: Gloss black grille?
That looks really good! Well done!DavidRS4 wrote:
I have cut some diamond pieces of wood that fit through the grill and then twist 90 degrees to lock the plate in place. There's foam behind the plate to stop it rubbing against the grill.
Audi RS4 Avant
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
Re: Gloss black grille?
+1
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
-
- 2nd Gear
- Posts: 181
- Joined: Tue Nov 22, 2016 1:32 pm
Re: Gloss black grille?
Harding what splitter is that?
Re: Gloss black grille?
Yeah i'd like to see more pics of that from more angleschriswhite1992 wrote:Harding what splitter is that?
Drive low,park lower
Re: Gloss black grille?
You mean David.chriswhite1992 wrote:Harding what splitter is that?
-
- 2nd Gear
- Posts: 181
- Joined: Tue Nov 22, 2016 1:32 pm
Re: Gloss black grille?
Oops looked at the wrong postMikeFish wrote:chriswhite1992 wrote:Harding what splitter is that?
You mean David.
Re: Gloss black grille?
The splitter is a one off in the bottom picture. I got someone to make up something tha looked like the shape of the MTM RS6 splitter as I really liked it. The weave is terrible and it's not fully finished and a tiny bit short where it goes towards the wheels.
The guy lost interest in doing it and never bothered contacting me to finish it. I'd love to have it properly made as it does look amazing. Is anyone interested in getting hem made or can actually properly make one from my template? Jules?
The guy lost interest in doing it and never bothered contacting me to finish it. I'd love to have it properly made as it does look amazing. Is anyone interested in getting hem made or can actually properly make one from my template? Jules?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Who is online
Users browsing this forum: Bing [Bot] and 266 guests