Brake pad retaining pins
Brake pad retaining pins
Hi all so have the rs4 up on stands for the winter ready for pampering new brake lines good clean in round suspension etc but during the summer I had put new pads in but pins were seized and would not move so now that I have the calipers off was going to replace the pins with new ones where's the best place to buy theses would rather not buy off Audi as I would guess they would be over priced as usual also wats the best brake fluid to replace with thanks in advance stew.
Re: Brake pad retaining pins
Last time I changed my front discs and pads the driver side had a pin seized solid and I ended up having to break it to get it out. Couldn't seem to find replacement pins for that calliper type and ended up making one myself, but if you do happen to source them I'd love to know where from ready for when I do the rears.
'06 RS4 B7 Avant - Mugello Blue
Re: Brake pad retaining pins
Rears are different - floating caliper set up, no retaining pins.
Daytona RS4
Re: Brake pad retaining pins
Thanks for the replies guys think I might look into seeing a Machine Shop although was talking to a guy today who took caliper off and was trying to hammer pins out and broke the lug off the caliper don't want to be doing that he said just leave as is take caliper off when changing pads !!
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: Brake pad retaining pins
Part number is - 3D0698269 about £25 per side from Audi I seem to remember.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: Brake pad retaining pins
Thanks for the reply Sam that's not to bad thought it would have been worse
Who is online
Users browsing this forum: JamesBaby and 151 guests