I like these wheels a lot question is will these be a straight swap?or will I need spacers etc.im pretty crap when it comes to this subject so looking for some info from the experts. cheers lads
http://www.ebay.co.uk/itm/19-ALLOY-WHEE ... 3aabe8c93f
advice needed lads
- MartayMcFly
- 5th Gear
- Posts: 1293
- Joined: Mon Sep 03, 2012 6:18 pm
- Location: Scotland
Re: advice needed lads
You'd need at least 10mm spacers, probably more to get them sitting right. For comparison, the wheels you've got on are 9" wide and ET25, those are 8.5" ET38, so they're 6mm narrower either side of the centre and sit 13mm further in to the arch so 19mm spacers (which you can't get, so say 20mm) would sit the outer face the same as you have now. Standard wheels are 9" ET29 so again 6mm for the width and 9mm further in, or 15mm spacers to match how the standard wheel's face sits.
2001 8L S3 - sold
2008 8P2 S3 - sold
2007 B7 RS4 - sold
2006 B7 RS4 (supercharged) - sold
2016 C7 RS6 - sold
2015 8V RS3 Stage 3 - sold
2017 Alfa Giulia Quadrifoglio
2008 8P2 S3 - sold
2007 B7 RS4 - sold
2006 B7 RS4 (supercharged) - sold
2016 C7 RS6 - sold
2015 8V RS3 Stage 3 - sold
2017 Alfa Giulia Quadrifoglio
- geordie jay
- 5th Gear
- Posts: 1114
- Joined: Mon Jul 21, 2014 7:35 pm
Re: advice needed lads
cheers martin !!! im honestly crap when it comes to alloy sizes and widths
Re: advice needed lads
Exactly the same bud, I can't work it out either hence all my questions about alloys.geordie jay wrote:cheers martin !!! im honestly crap when it comes to alloy sizes and widths
Misano Red| Black Optics| Black alloys| Black mirrors| Full CC at MRC| MRC Stage 2 Manifold| MRC Stage 2 Remap| De-Catted| KW V3 with H&R Fr & rear ARB| H&R Hubcentric spacers 8mm Fr, 10mm rear| A few choice CF goodies to go on|
Who is online
Users browsing this forum: Google [Bot], MTBear and 422 guests