what alloys would you choose

4.2 V8 32v Naturally Aspirated - 414 bhp
User avatar
MartayMcFly
5th Gear
Posts: 1293
Joined: Mon Sep 03, 2012 6:18 pm
Location: Scotland

Re: what alloys would you choose

Post by MartayMcFly » Sat Jul 11, 2015 2:12 pm

I've never seen those before, like a concave version of the standard wheels. A mate of mine keeps pushing me towards the 20" version of the standard wheels, I think off an A5 fits width and offset wise. I'm not sure you'll get away with 9.5j ET21 though, a bit too far out.
2001 8L S3 - sold
2008 8P2 S3 - sold
2007 B7 RS4 - sold
2006 B7 RS4 (supercharged) - sold
2016 C7 RS6 - sold
2015 8V RS3 Stage 3 - sold
2017 Alfa Giulia Quadrifoglio

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: what alloys would you choose

Post by MikeFish » Sat Jul 11, 2015 2:31 pm

I agree, lovely wheels and I think would look great on a B7 but they would stick out a tiny bit too much. It's a shame cos they would only need to be 4mm less to fit the rear perfectly and 6mm on the front though (although with my ride height I'd need them about 11mm further in).

anawaz
1st Gear
Posts: 82
Joined: Thu May 07, 2015 2:28 pm
Location: North East London

Re: what alloys would you choose

Post by anawaz » Wed Jul 15, 2015 4:57 am

i thought these didn't look out-of-place at all on black avant:

http://i.imgur.com/jC9BP.jpg

Rick_RS4
Cruising
Posts: 2882
Joined: Mon Dec 13, 2010 4:37 pm

Re: what alloys would you choose

Post by Rick_RS4 » Wed Jul 15, 2015 9:57 am

Standard rims are et 29 and with 10mm spacer that everyone puts on makes et 19 so those at 21 will be fine. Or am I getting my et wrong

User avatar
MartayMcFly
5th Gear
Posts: 1293
Joined: Mon Sep 03, 2012 6:18 pm
Location: Scotland

Re: what alloys would you choose

Post by MartayMcFly » Wed Jul 15, 2015 10:27 am

Rick_RS4 wrote:Standard rims are et 29 and with 10mm spacer that everyone puts on makes et 19 so those at 21 will be fine. Or am I getting my et wrong
I think 8 front, 10 rear is the common choice. So ET 21 front, 19 rear.
2001 8L S3 - sold
2008 8P2 S3 - sold
2007 B7 RS4 - sold
2006 B7 RS4 (supercharged) - sold
2016 C7 RS6 - sold
2015 8V RS3 Stage 3 - sold
2017 Alfa Giulia Quadrifoglio

User avatar
SuprSi
5th Gear
Posts: 1416
Joined: Mon Mar 17, 2014 12:10 pm
Location: Southampton

Re: what alloys would you choose

Post by SuprSi » Wed Jul 15, 2015 12:14 pm

anawaz wrote:i thought these didn't look out-of-place at all on black avant:

http://i.imgur.com/jC9BP.jpg
I might be biased, but that looks amazing to me!
2003 C5 RS6 Avant Daytona Grey

anawaz
1st Gear
Posts: 82
Joined: Thu May 07, 2015 2:28 pm
Location: North East London

Re: what alloys would you choose

Post by anawaz » Wed Jul 15, 2015 12:59 pm

are they vw or audi, and can you tell if they're 19s or 20" ?

i think they look class, but especially on black. my b7 is purple so i don't think i will consider.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: what alloys would you choose

Post by MikeFish » Wed Jul 15, 2015 7:01 pm

Rick_RS4 wrote:Standard rims are et 29 and with 10mm spacer that everyone puts on makes et 19 so those at 21 will be fine. Or am I getting my et wrong
But they are also half inch wider.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: what alloys would you choose

Post by MikeFish » Wed Jul 15, 2015 7:09 pm

They will be like your rotors with an 11mm spacer.

User avatar
geordie jay
5th Gear
Posts: 1114
Joined: Mon Jul 21, 2014 7:35 pm

Re: what alloys would you choose

Post by geordie jay » Sat Jul 18, 2015 11:03 pm

i like these but would repaint in anthricite..opinions lads

http://www.ebay.co.uk/itm/291516641128? ... EBIDX%3AIT

User avatar
NJMAudiRS4
4th Gear
Posts: 554
Joined: Sun Dec 22, 2013 7:38 pm

Re: what alloys would you choose

Post by NJMAudiRS4 » Sun Jul 19, 2015 11:16 am

Vossen VVS CVT if I had the money
Audi RS4 Avant. MRC Stage 2 Manifold, caf, Map, JCWF Manifold back Exhaust with Sports Cats, H&R spacers, 449ps & 483nm

User avatar
MartayMcFly
5th Gear
Posts: 1293
Joined: Mon Sep 03, 2012 6:18 pm
Location: Scotland

Re: what alloys would you choose

Post by MartayMcFly » Sun Jul 19, 2015 1:05 pm

Always fancied seeing these on a B7 to see what they're like.

http://m.ebay.co.uk/itm/Genuine-Audi-S5 ... nav=SEARCH
2001 8L S3 - sold
2008 8P2 S3 - sold
2007 B7 RS4 - sold
2006 B7 RS4 (supercharged) - sold
2016 C7 RS6 - sold
2015 8V RS3 Stage 3 - sold
2017 Alfa Giulia Quadrifoglio

RIV
Cruising
Posts: 5122
Joined: Wed Nov 30, 2011 10:27 pm

Re: what alloys would you choose

Post by RIV » Sun Jul 19, 2015 1:36 pm

They look crap on a b7
Sorry Sam :shock:

User avatar
Surrey Sam
Cruising
Posts: 4195
Joined: Tue Nov 27, 2012 7:34 pm
Location: Sussex

Re: what alloys would you choose

Post by Surrey Sam » Sun Jul 19, 2015 3:26 pm

RIV wrote:They look crap on a b7
Sorry Sam :shock:
:assflash: :assflash: :assflash:

lol...it's ok. I'm not a fan of black wheels, each to their own :thumbs:

Yes, I have the RS5 wheels as my winter setup. They fit absolutely fine with SS+ suspension and without any spacers, as the offset is equivalent to running a 5mm spacer. Also, no problem with my larger Ceramic Brakes and Calipers which were fitted after the photos were taken.

Image

Image
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW

RIV
Cruising
Posts: 5122
Joined: Wed Nov 30, 2011 10:27 pm

Re: what alloys would you choose

Post by RIV » Sun Jul 19, 2015 7:59 pm

They do look better than what I could remember, it's hard to beat the standard set up on be b7
Paint them black Sam :assflash:

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google [Bot] and 104 guests