So even though it's a 4gb "old" sd card it will only recognise 512mb of it?PetrolDave wrote:OK, then ignore the message on the RNS-E screen - that's a "feature" of the RNS-E firmware.birdiemachine wrote:Yup fat32 and 4096kb file size : (PetrolDave wrote: Are you formatting them FAT32?
Just copy up to 512 MP3 files/folders (any more will be ignored) making sure that the path length (file name plus folder name) is less than 64 characters on all the files and you should be OK.
Newbie making a introduction
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Re: Newbie making a introduction
That's NOT what I said...birdiemachine wrote:So even though it's a 4gb "old" sd card it will only recognise 512mb of it?
It will recognise all 4GB, but it will only read the first 512 FILES - and since most MP3 files are in the 4-8MB region that's not really a limit you'll hit very often.
Gone: 2006 B7 RS4 Avant (Phantom Black)
Re: Newbie making a introduction
Birdie:
Read this: viewtopic.php?f=35&t=108530&hilit=+RNSe
Buy this: http://www.ebay.co.uk/itm/Audi-A4-S4-RS ... 3a97d0ee5a
Read this: viewtopic.php?f=35&t=108530&hilit=+RNSe
Buy this: http://www.ebay.co.uk/itm/Audi-A4-S4-RS ... 3a97d0ee5a
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
Cheers for the help with the rns guys, going to save up some beer tokens for the newer one.
Got my car into my local indie today, i really trust him and he's a porsche specialist and has a guy working with him who worked with audi for years and he is a r32//4s4/rs6 nut.
Not sure any of you will have read above the problems i was having with rattling etc, but they have found it to be the rear subframe bushings. He gave the car a really thorough going over and said it was the best rs4 he'd ever saw.
It's a huge job to change the rear subframe bushings, fuel tank out, prop shaft dropped, rear diff etc, 3 days and £700 of labour. Pleased it wasn't my drc as i thought the standard system was really good and wasn't too enthralled about going down the coilover route.
All in all a good friday for me!
Cheers
Got my car into my local indie today, i really trust him and he's a porsche specialist and has a guy working with him who worked with audi for years and he is a r32//4s4/rs6 nut.
Not sure any of you will have read above the problems i was having with rattling etc, but they have found it to be the rear subframe bushings. He gave the car a really thorough going over and said it was the best rs4 he'd ever saw.
It's a huge job to change the rear subframe bushings, fuel tank out, prop shaft dropped, rear diff etc, 3 days and £700 of labour. Pleased it wasn't my drc as i thought the standard system was really good and wasn't too enthralled about going down the coilover route.
All in all a good friday for me!
Cheers
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
Been a while since I've updated.
Been doing some research into my b7 with Audi, turns out it's had a lot of recall work done by Audi :
- oil cooler pipes
- drc all 4 changed
- leaking aux radiator changed
- software update
Also sat in the rear of it when cleaning it and discovered it has rear heated seats.
Gave mrc a phone and they have mapped it and carbon cleaned it so all in all a lot of good news.
Got a crazy Good price from my local Audi dealer for a full service including gearbox and diff oil so that's happening next week.
Got a mini detail in the mean time as well, plans are to get it into my garage and all 4 wheels off for full refurb and I am going to clean all 4 corners and the engine bay and get it sorted for the summer.
Some pics from the mini detail :
Been doing some research into my b7 with Audi, turns out it's had a lot of recall work done by Audi :
- oil cooler pipes
- drc all 4 changed
- leaking aux radiator changed
- software update
Also sat in the rear of it when cleaning it and discovered it has rear heated seats.
Gave mrc a phone and they have mapped it and carbon cleaned it so all in all a lot of good news.
Got a crazy Good price from my local Audi dealer for a full service including gearbox and diff oil so that's happening next week.
Got a mini detail in the mean time as well, plans are to get it into my garage and all 4 wheels off for full refurb and I am going to clean all 4 corners and the engine bay and get it sorted for the summer.
Some pics from the mini detail :
Re: Newbie making a introduction
Sounds like you are enjoying ownership. It looks great too BTW. Is it on stock suspension? It looks low.
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
Sports suspension plusmarc1 wrote:Sounds like you are enjoying ownership. It looks great too BTW. Is it on stock suspension? It looks low.
Re: Newbie making a introduction
Get some more pics up, it looks great!
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
Nice wee snap from Audi-sport.net meet in front of the harland and wolff cranes.
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
Quick question for some of the learned gentleman on here, is there anyway to stop the radio always coming on when I start the car? Starting to become really irritating now cheers.
Re: Newbie making a introduction
Press and hold down the on/off/ volume adjustment button at the bottom right hand side. Press once mutes, press and hold switches off.birdiemachine wrote:Quick question for some of the learned gentleman on here, is there anyway to stop the radio always coming on when I start the car? Starting to become really irritating now cheers.
Re: Newbie making a introduction
Looking awesome . was there a lot of difference pre and post CC and map?.
Maybe a silly question but how did you go about finding out what recall work has been done. I spoke to Audi about my cars history and they sent me a sheet confirming the times/dates and mileage of my previous services, but nothing about recall work?
Maybe a silly question but how did you go about finding out what recall work has been done. I spoke to Audi about my cars history and they sent me a sheet confirming the times/dates and mileage of my previous services, but nothing about recall work?
-
- 4th Gear
- Posts: 594
- Joined: Tue Nov 13, 2012 1:49 pm
Re: Newbie making a introduction
I bought it like that mate so not sure, I phoned mrc and they confirmed it all for me.RichieRS wrote:Looking awesome . was there a lot of difference pre and post CC and map?.
Maybe a silly question but how did you go about finding out what recall work has been done. I spoke to Audi about my cars history and they sent me a sheet confirming the times/dates and mileage of my previous services, but nothing about recall work?
I have the Audi telephone number somewhere they have a special department for it I'll dig the number out for you tomorrow
Re: Newbie making a introduction
Should be in the back of your service book
RS4 B7
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift
MRC stage2 436ps-487nm
Revolution intake, custom CAF, carbon clean, deflaped manifold, JHM manifold spacers, Forge oil cooler, Forge spacers, full de-cat, Scorpion cat back, Trup's LED's, 20' S5 wheels, KW V3's.
Launch control & flat shift