Original Bluetooth installation
Original Bluetooth installation
HI, i am wondering if anyone can help me.
I have a audi RS4 B7 and i was wanting to install the Bluetooth extra in as it does not come with it. I have a RNSE system but does not come with the bluetooth extra. i preferably would like to install the original factory bluetooth.
can anyone give me any guidance on how to install it and what components i would need?
I have searched on ebay and i have come across the bluetooth module but i cannot seem to find any of the wiring looms i require to install also i do not know what and which wiring to get.
Can someone please give me some advice?
Appreciate all you help.
Thanks
MO
I have a audi RS4 B7 and i was wanting to install the Bluetooth extra in as it does not come with it. I have a RNSE system but does not come with the bluetooth extra. i preferably would like to install the original factory bluetooth.
can anyone give me any guidance on how to install it and what components i would need?
I have searched on ebay and i have come across the bluetooth module but i cannot seem to find any of the wiring looms i require to install also i do not know what and which wiring to get.
Can someone please give me some advice?
Appreciate all you help.
Thanks
MO
Re: Original Bluetooth installation
It's a piece of piss mate you need module plug and play loom antenna and mic all on eBay circa £200 for all let me know when you got all the bits and I'll go through fitting with you. You need Vagcom to code it
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Re: Original Bluetooth installation
You need a kit like this http://www.kufatec.de/shop/en/audi/a4/a ... tooth-only
It will be cheaper off eBay, but that's a good reference to make sure you get the right thing.
Make sure you get the newest possible module, preferably an 8P1 862 335 see http://audiforum.us/threads/audi-blueto ... s.6858/for part number information.
It will be cheaper off eBay, but that's a good reference to make sure you get the right thing.
Make sure you get the newest possible module, preferably an 8P1 862 335 see http://audiforum.us/threads/audi-blueto ... s.6858/for part number information.
Gone: 2006 B7 RS4 Avant (Phantom Black)
Re: Original Bluetooth installation
THANKS LADS APPRECIATE YOU HELP
-
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Re: Original Bluetooth installation
quick question regarding the blue tooth retro fit, does the steering wheel need to be changed for the one with call answer and mode button ?
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Re: Original Bluetooth installation
Not if you have the RNS-E sat nav as you can answer the call using the controls on that.boombastik wrote:quick question regarding the blue tooth retro fit, does the steering wheel need to be changed for the one with call answer and mode button ?
Gone: 2006 B7 RS4 Avant (Phantom Black)
-
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Re: Original Bluetooth installation
I have the rnse sat nav so other than coding its a kit that can be installed easily ?
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Re: Original Bluetooth installation
If I bought this http://www.ebay.co.uk/itm/AUDI-RNS-E-BL ... 3f03c2b3a1, how would I then go about streaming bluetooth audio using my existing iPod 30pin connection? Could I get a bluetooth dongle or would that bugger up the connection to the RNSE?
Im basically looking to have bluetooth phone capability and audio streaming from my iPhone 6, but I'm getting confused..
Help!
Im basically looking to have bluetooth phone capability and audio streaming from my iPhone 6, but I'm getting confused..
Help!
Current: 07' B7 RS4 Avant
Previous: Mk2 Golf VR6 conversion, Mk2 Golf GTi 16v, Mk2 Golf 1.6 GL Auto, Mk3 Golf R32 conversion, BMW Z4 Coupe, BMW 430d, Audi S3, Defender 90 XS, Alfa Romeo 145
Previous: Mk2 Golf VR6 conversion, Mk2 Golf GTi 16v, Mk2 Golf 1.6 GL Auto, Mk3 Golf R32 conversion, BMW Z4 Coupe, BMW 430d, Audi S3, Defender 90 XS, Alfa Romeo 145
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
Re: Original Bluetooth installation
Absolutely, I fitted mine the week after I bought my RS4 new in 2006 and it only took about an hour and a half including recoding the RNS-E, phone module and instruments with VCDS.boombastik wrote:I have the rnse sat nav so other than coding its a kit that can be installed easily ?
Gone: 2006 B7 RS4 Avant (Phantom Black)
Re: Original Bluetooth installation
Now this may sound stupid but have you checked if you have got phone prep already. As the dick head who sold me my RS4 fitted a Parrot phone thingy. I ripped it out as I hate 3rd party crap only to find the car had phone prep installed and I linked in via Bluetooth. Hey presto hands free.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Who is online
Users browsing this forum: Google [Bot], r8wut and 228 guests