Standard exhaust mod?
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Standard exhaust mod?
I'm a skin flint as you'll see reading on....
The above is my smashed up exhaust back box. There are three chambers. 1st one is stuffed with fluff, 2nd one is clear but directs gasses either straight through if valve open, 3rd is more fluff then out to un-valved exit pipe.
So I just want more noise, could I just de-fluff chamber one? What I don't want is loss of power (if I will then I'll forget it) but more noise would be good as I can't have Neil taking all the noise glory with his JC fabweld! I intend keeping the resonator for now.
Thoughts?
The above is my smashed up exhaust back box. There are three chambers. 1st one is stuffed with fluff, 2nd one is clear but directs gasses either straight through if valve open, 3rd is more fluff then out to un-valved exit pipe.
So I just want more noise, could I just de-fluff chamber one? What I don't want is loss of power (if I will then I'll forget it) but more noise would be good as I can't have Neil taking all the noise glory with his JC fabweld! I intend keeping the resonator for now.
Thoughts?
Re: Standard exhaust mod?
Make em straight through pipes
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: Standard exhaust mod?
Almost will be in sport mode but can still keep the noise down a little in normal mode (fingers crossed)?
Re: Standard exhaust mod?
This is something like E92 M3 owners are doing to their standard exhausts.
Re: Standard exhaust mod?
Love it when you find things stuffed full of fluffesp_mm-270 wrote:...one is stuffed with fluff...
Errrrrrrmmmm wrong forum for that activityesp_mm-270 wrote:...could I just de-fluff...
As if I would!esp_mm-270 wrote:...I can't have Neil taking all the noise glory with his JC fabweld...
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: Standard exhaust mod?
Is the crudeness really necessary!!!? Lol
Interesting the E92 crew are doing this. Puts me off a bit tbh lol
Interesting the E92 crew are doing this. Puts me off a bit tbh lol
Re: Standard exhaust mod?
Soweeeeeee!esp_mm-270 wrote:Is the crudeness really necessary!!!? Lol
I read this from Tony - might give you some more gain than the back boxes - messier though...
http://forum.rs246.com/viewtopic.php?f= ... 06#p682206
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: Standard exhaust mod?
In that case, pour a cold one!esp_mm-270 wrote:Already done and a MRC stage 2
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
Who is online
Users browsing this forum: No registered users and 153 guests