Cheers Coffey only managed to get 4,8 done yesterday !! Nxt Friday the other 6coffey555 wrote:1-5-4-8-6-3-7-2
Carbon clean with DIY walnut shell blaster
Re: Carbon clean with DIY walnut shell blaster
- TonyHayers
- 5th Gear
- Posts: 1175
- Joined: Fri Jun 01, 2012 12:03 am
- Location: Leeds
Re: Carbon clean with DIY walnut shell blaster
Has it completely given up the ghost or is it just the thermal cutout. Mine kept going every 15 mins or so, but leave it 20 mins and would be back again.bazza138 wrote:Long time away from doing this , but 1/2 off work to try this
But started doing this bloody Hoover has given up !!! Ffs Now off to buy cheap Hoover
06 Phantom Black Saloon:
DONE: Water Meth Injection, Carbon clean at 64k, CAI, Gutted Precats, Non-res x-pipe, H&R 8mm spacers, H&R springs
^ GONE
DONE: Water Meth Injection, Carbon clean at 64k, CAI, Gutted Precats, Non-res x-pipe, H&R 8mm spacers, H&R springs
^ GONE
-
- 2nd Gear
- Posts: 154
- Joined: Sun Oct 03, 2010 12:06 pm
Re: Carbon clean with DIY walnut shell blaster
Well i must say done this last weekend wow what a difference, Really shocked how much better it feels..
On an awesome write up.
On an awesome write up.
Re: Carbon clean with DIY walnut shell blaster
Just thermal cut out keeps going ! Every 5mins grrrrr , only done 4 ports !! 4 to go !!
Also blown oil cooler hose has gone ! I got warranty cover on it , maybe a claim on the oil cooler and hoses ring them up today and see what what's !
Also blown oil cooler hose has gone ! I got warranty cover on it , maybe a claim on the oil cooler and hoses ring them up today and see what what's !
Re: Carbon clean with DIY walnut shell blaster
Right I'm 6/8 done !
Is the normal bit of oil here !! In the manifold Is it the oil / cooling system breather separator faulty ???
Is the normal bit of oil here !! In the manifold Is it the oil / cooling system breather separator faulty ???
Re: Carbon clean with DIY walnut shell blaster
bazza138 wrote:Right I'm 6/8 done !
Is the normal bit of oil here !! In the manifold Is it the oil / cooling system breather separator faulty ???
Re: Carbon clean with DIY walnut shell blaster
Cheers Rick
- TonyHayers
- 5th Gear
- Posts: 1175
- Joined: Fri Jun 01, 2012 12:03 am
- Location: Leeds
Re: Carbon clean with DIY walnut shell blaster
Just back from hols. Yeah, the layer of oil in manifold is to be expected.
06 Phantom Black Saloon:
DONE: Water Meth Injection, Carbon clean at 64k, CAI, Gutted Precats, Non-res x-pipe, H&R 8mm spacers, H&R springs
^ GONE
DONE: Water Meth Injection, Carbon clean at 64k, CAI, Gutted Precats, Non-res x-pipe, H&R 8mm spacers, H&R springs
^ GONE
Re: Carbon clean with DIY walnut shell blaster
Now clean and rebuild her !!
Re: Carbon clean with DIY walnut shell blaster
Now about to change oil hoses ! And oil & filter
Question
Esp light on dash !!
Dose this need to re set , or will this go out on when on 1st drive ?
S Button exhaust flaps not opening ! I see what happens when I take girl out Tomoz !
Re: Carbon clean with DIY walnut shell blaster
It should go out after a little while of driving.
Avus Audi RS4 2076|Black optic |Carbon Airbag surround|LED'S inside|RNS-E style Android Stereo with DAB+ dongle|
Re: Carbon clean with DIY walnut shell blaster
Or you have a vak leak on her. Look under the front carbon fiber cover where they join up you have put the pipe back on?
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2
Gone-audi s3 8p stage2+ with loba lo400 turbo.
Gone-audi s3 8p stage2+ with loba lo400 turbo.
Re: Carbon clean with DIY walnut shell blaster
All the pipes vacuum are on ! I re located the vacuum check value to under the small carbon cover ! I tackle that job soon
Oil hose off !! What a bag ball of a job that was !! Threads all gone on the oil cooler !!
So new cooler to buy now !!
Oil hose off !! What a bag ball of a job that was !! Threads all gone on the oil cooler !!
So new cooler to buy now !!
Re: Carbon clean with DIY walnut shell blaster
first time I did it i left of one of the manifold flap position sensors. That lit up my EML. I'd lay money on a vac line or an unplugged flap sensor. I've had the manifold off 4 times in total and only had the light on the once.
Who is online
Users browsing this forum: Google [Bot] and 106 guests