B7 RS4 Picture Thread
Re: B7 RS4 Picture Thread
dare I say bonnet gap
Daytona Avant - Optics - Titanium pack - MRC 464.6ps 513Nm - H&R ARBs + Springs - Apikol Diff mount - 034 Tranny mount - JHM Shifter
Re: B7 RS4 Picture Thread
LOL, I didn't think it was too bad, I think mine is worse.thedoluk wrote:dare I say bonnet gap
Re: B7 RS4 Picture Thread
Are you from Sweden, Harding?
I also agree its very nice to jump in these RS4's even they are relatively old cars already.They still feel and look special:)
I also agree its very nice to jump in these RS4's even they are relatively old cars already.They still feel and look special:)
Daytona Grey B8.5 & Guards Red 981 / Ex.Audi RS4 B7 Sedan, Daytona Grey.
Re: B7 RS4 Picture Thread
Yes i am! These cars will never look too old! Kippis!rob-s wrote:Are you from Sweden, Harding?
I also agree its very nice to jump in these RS4's even they are relatively old cars already.They still feel and look special:)
You mean the mirrors, right..? I know... Kinda liked the B7 A4 ones better at first...MikeFish wrote: Shame about the ears.
Audi RS4 Avant
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
[2014]: blacked out wheels & grill: center res delete : flaps open
[2015]: brembo & yellowstuff : michelin pss : h&r spacers
[2016]: sachs performance clutch : decoked : led there be light : black window trim
[2017]: stertman stage 1 : black headlights & clear corner mod : gruppe m air intake : gutted resonators
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: B7 RS4 Picture Thread
Bit dubious about posting this as won't be everyone's cup of tea but it was cheap and I like it
Re: B7 RS4 Picture Thread
Do your parking sensors work on the near-side?
No matter where you go, there you are.
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: B7 RS4 Picture Thread
Yeah but locating the inner ones is a work in progress......
As you will know the sensors have paint and lacquer on them already so it seems OK in theory and practice to me......?
I also cut out around the headlamp washer so they would work if they worked normally lol.
As you will know the sensors have paint and lacquer on them already so it seems OK in theory and practice to me......?
I also cut out around the headlamp washer so they would work if they worked normally lol.
Re: B7 RS4 Picture Thread
I always wondered about doing my grill like yours. What grill did you mash up to make it fit yours ?
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
-
- 3rd Gear
- Posts: 415
- Joined: Mon Aug 12, 2013 12:49 am
- Location: London
Re: B7 RS4 Picture Thread
Think I saw that at AITP?
Would look so much better without the side mounted plate.
Would look so much better without the side mounted plate.
Re: B7 RS4 Picture Thread
Jus run without a plate
Re: B7 RS4 Picture Thread
This grill looks awesome dude please share how and where u got it fromCellDamage wrote:Think I saw that at AITP?
Would look so much better without the side mounted plate.
HYFR wrote:Jus run without a plate
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: B7 RS4 Picture Thread
Its a C6 RS6 grill centre chopped down to fit http://nickscarblog.com/diy/how-to-fit- ... ller-plateCovkiller wrote:I always wondered about doing my grill like yours. What grill did you mash up to make it fit yours ?
Yeah I don't like the side stick on plate either but didn't know what else to do. Can't be assed with getting tugged, didn't want it above the grill a la MX5 or e-type, nearly tried a square one but woulda overhung the air intake so went the alfa romeo way. If I get a shorter (5 digit or less) it may look a little better?
Above all else I wanted the grill open like the picture and the rest of the 'look' is secondary to me
-
- 3rd Gear
- Posts: 415
- Joined: Mon Aug 12, 2013 12:49 am
- Location: London
Re: B7 RS4 Picture Thread
I ran a US plate delete with no front plate for the best part of a year without any issues. Do it!
Re: B7 RS4 Picture Thread
How do you remove the plate holder?
I've undone the hex screws, plate still doesn't come off do you have to slide it to one side?
It's on my b8
I've undone the hex screws, plate still doesn't come off do you have to slide it to one side?
It's on my b8
- esp_mm-270
- 4th Gear
- Posts: 624
- Joined: Sat Dec 22, 2012 12:22 pm
Re: B7 RS4 Picture Thread
Not sure about the B8 but the C6 one the number plate "black plate" hooks around the holes in the grill. Don't go mad but try moving it side to side and up and down whilst levering from behind a little with your fingers. I think the two top ones go up and the bottom ones go down so try pushing down and trying to pop the top out and it should comeRIV wrote:How do you remove the plate holder?
I've undone the hex screws, plate still doesn't come off do you have to slide it to one side?
It's on my b8
Who is online
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 160 guests