B7 RS4 Picture Thread

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: B7 RS4 Picture Thread

Post by DavidRS4 » Fri Aug 22, 2014 7:58 pm

Had the window strips wrapped so it looks like black optics

Image[/URL]

Also had the boot strip done to match the body work

Image[/URL]

Also fitted B8 RS4 rear caliper plates to look like the front calipers

Image[/URL]
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: B7 RS4 Picture Thread

Post by bam_bam » Fri Aug 22, 2014 9:46 pm

That's a lot of barrel.
No matter where you go, there you are.
Top
User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: B7 RS4 Picture Thread

Post by Covkiller » Fri Aug 22, 2014 10:49 pm

Looking good
:thumbs:
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Top
User avatar
kiwi_mtm
4th Gear
Posts: 584
Joined: Mon May 05, 2003 8:33 am
Location: New Zealand

Re: B7 RS4 Picture Thread

Post by kiwi_mtm » Sun Aug 24, 2014 7:58 am

Not pretty, but practical

Image
2014 RS6 (2023 on order)
2017 Q7
1993 E36 M3 Tarmac Rally car
2001 Porsche Boxster circuit car
2017 Porsche 991.2 GT3 Clubsport
Top
User avatar
kiwi_mtm
4th Gear
Posts: 584
Joined: Mon May 05, 2003 8:33 am
Location: New Zealand

Re: B7 RS4 Picture Thread

Post by kiwi_mtm » Sun Aug 24, 2014 8:00 am

When the Rs4 lets you down....
speed sensor failure

Image
2014 RS6 (2023 on order)
2017 Q7
1993 E36 M3 Tarmac Rally car
2001 Porsche Boxster circuit car
2017 Porsche 991.2 GT3 Clubsport
Top
User avatar
kiwi_mtm
4th Gear
Posts: 584
Joined: Mon May 05, 2003 8:33 am
Location: New Zealand

Re: B7 RS4 Picture Thread

Post by kiwi_mtm » Sun Aug 24, 2014 8:02 am

Night time bling

Image
Image
Image
Image
2014 RS6 (2023 on order)
2017 Q7
1993 E36 M3 Tarmac Rally car
2001 Porsche Boxster circuit car
2017 Porsche 991.2 GT3 Clubsport
Top
User avatar
RS4eddie
1st Gear
Posts: 97
Joined: Sun Jun 23, 2013 6:06 am

Re: B7 RS4 Picture Thread

Post by RS4eddie » Sun Aug 24, 2014 8:44 am

^^^ hell yeah. nice photos man!!
2007 RS4 | Phantom Black | Milltek'ed | LED DRL'ed | H&R wheel spaced | 034 Density Line control armed | Hotchkis F + R Sway Barred | K&N Filtered | Ziza lit | Lamix-ed | Passport 9500ix hardwired | Dension Pro BT'ed | StopTech Brake Padded
Top
RS6chris!
Cruising
Posts: 3845
Joined: Sun Oct 25, 2009 8:55 pm
Location: North East(Teesside).

Re: B7 RS4 Picture Thread

Post by RS6chris! » Sun Aug 24, 2014 9:15 am

DavidRS4 wrote:Had the window strips wrapped so it looks like black optics

Image[/URL]

Also had the boot strip done to match the body work

Image[/URL]

Also fitted B8 RS4 rear caliper plates to look like the front calipers

Image[/URL]



Awesome work Dave

Best Stanced RS4 ever

Does anyone know if the caliper plates would fit C6 RS6 rear calipers?
Panamera Turbo S e hybrid (again)
RS6 C8 carbon black(merlin)
Panamera Turbo S e hybrid
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: B7 RS4 Picture Thead

Post by DavidRS4 » Sun Aug 24, 2014 9:27 am

Thanks everyone. Slowly getting there.

I don't see why they wouldn't fit Chris. I could measure the distance between the two fixing points. There's two lugs on the back of the plates that you have to drill a 10mm hole into the caliper. I must have gone just over a centimetre deep. You then put two metal clips inside the hole and then push the plate with the lugs into them.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
marc1
Cruising
Posts: 3289
Joined: Sun Jan 31, 2010 4:46 pm

Re: B7 RS4 Picture Thread

Post by marc1 » Sun Aug 24, 2014 10:00 am

kiwi_mtm wrote:Not pretty, but practical

Image
I disagree. The B5 is a great looking car ASWELL as being practical. And Noggy is the best colour. :nogarors4: I miss mine a lot. :cry:
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: B7 RS4 Picture Thead

Post by DavidRS4 » Sun Aug 24, 2014 11:37 am

DavidRS4 wrote:Thanks everyone. Slowly getting there.

I don't see why they wouldn't fit Chris. I could measure the distance between the two fixing points. There's two lugs on the back of the plates that you have to drill a 10mm hole into the caliper. I must have gone just over a centimetre deep. You then put two metal clips inside the hole and then push the plate with the lugs into them.
Chris,
The holes are approximately 7.5 cm apart
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
leericho
2nd Gear
Posts: 148
Joined: Tue Jan 28, 2014 10:06 pm
Location: Sunderland

Re: B7 RS4 Picture Thread

Post by leericho » Sun Aug 24, 2014 7:14 pm

Image
Top
User avatar
RS4eddie
1st Gear
Posts: 97
Joined: Sun Jun 23, 2013 6:06 am

B7 RS4 Picture Thread

Post by RS4eddie » Wed Aug 27, 2014 7:11 pm

leericho wrote:Image
nice! you thinking about wrapping window trim black to maintain the mean, aggressive look? wheels look great!! Are they satin or gloss...hard to tell in the pic?
2007 RS4 | Phantom Black | Milltek'ed | LED DRL'ed | H&R wheel spaced | 034 Density Line control armed | Hotchkis F + R Sway Barred | K&N Filtered | Ziza lit | Lamix-ed | Passport 9500ix hardwired | Dension Pro BT'ed | StopTech Brake Padded
Top
User avatar
RS4eddie
1st Gear
Posts: 97
Joined: Sun Jun 23, 2013 6:06 am

Re: B7 RS4 Picture Thread

Post by RS4eddie » Wed Aug 27, 2014 7:15 pm

Threw some new tails on..
ImageUploadedByTapatalk1409163325.993648.jpg
2007 RS4 | Phantom Black | Milltek'ed | LED DRL'ed | H&R wheel spaced | 034 Density Line control armed | Hotchkis F + R Sway Barred | K&N Filtered | Ziza lit | Lamix-ed | Passport 9500ix hardwired | Dension Pro BT'ed | StopTech Brake Padded
Top
Olly_K
3rd Gear
Posts: 287
Joined: Fri Aug 27, 2004 7:43 pm

Re: B7 RS4 Picture Thread

Post by Olly_K » Sun Aug 31, 2014 8:24 pm

New rims:

Image

Image
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: No registered users and 95 guests