4.2 V8 32v Naturally Aspirated - 414 bhp
-
Matt_lad
- 1st Gear
- Posts: 91
- Joined: Tue Mar 18, 2014 10:42 pm
Post
by Matt_lad » Wed Apr 30, 2014 10:45 pm
sync24 wrote:Hey Neil - Do these illuminate the ground as well or are they just bright enough to light the number plate. I've some eBay ones that never, ever throw an error but they are a little too bright for my liking.
Trups: Front indicator bulbs next please

I've got some of those eBay jobbies on my B6 and they're brighter than the headlights!
These look spot on, looking forward to receiving my order soon. Full interior set, drl's, sidelights and plate lights

B7 RS4 - Sprint Blue Saloon
MRC Stg2 map : Pre-cat delete : MRC Stg2 Inlet : CAF : 437PS/462Nm
Int. & Ext. LED's : KW V3's : H&R Spacers 8mm
-
neilparf
- Cruising
- Posts: 2908
- Joined: Tue Oct 22, 2013 1:21 am
- Location: Kent
Post
by neilparf » Wed Apr 30, 2014 11:17 pm
Matt_lad wrote:These look spot on, looking forward to receiving my order soon. Full interior set, drl's, sidelights and plate lights

You can't go wrong and won't be disappointed!
Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
-
Trups
- Trader (Expired)
- Posts: 1316
- Joined: Sat Jun 09, 2012 8:38 pm
Post
by Trups » Thu May 01, 2014 8:54 am
Thanks for the pictures Neil.
I didn't want to go too dim and not too bright, my perfect bulb would be 1 small LED but then I don't think that wouldnt be classed as an upgrade LOL.
Trups
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.
If you have any quieries for interior or exterior LED's then get in touch.
-
RS04YOB
- 4th Gear
- Posts: 906
- Joined: Sun Jun 21, 2009 10:48 am
Post
by RS04YOB » Thu May 01, 2014 9:23 am
Are these easy to fit, are they a straight replacement for the originals is there any modifying required at all
-
Trups
- Trader (Expired)
- Posts: 1316
- Joined: Sat Jun 09, 2012 8:38 pm
Post
by Trups » Thu May 01, 2014 10:26 am
That's correct, its how i designed them so they are a simple swap over.
trups
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.
If you have any quieries for interior or exterior LED's then get in touch.
-
neilparf
- Cruising
- Posts: 2908
- Joined: Tue Oct 22, 2013 1:21 am
- Location: Kent
Post
by neilparf » Thu May 01, 2014 11:17 am
Trups wrote:Thanks for the pictures Neil.
Pleasure!
Trups wrote:I didn't want to go too dim and not too bright, my perfect bulb would be 1 small LED but then I don't think that wouldnt be classed as an upgrade LOL.
Yes, that may not be worth the swap - nice job anyway!

Gone but never forgotten:
2007 RS4 B7 Saloon, Metallic Silver with SS+.
LED's all round and Dectane LED tailights. KDS detail and paint. Lepsons black chrome, heavy on the silver wheels. JCWeldFab full system - valved and no pre-cats. MRC stage 2, de-flap and full carbon clean - 438PS and 489NM. HEL brake lines. H&R Spacers. Gtechniq C1 and EXO V2 coatings. 2010+ RNS-E. On the MRC dyno: http://youtu.be/y_k0VJ2--y8
-
John Johnson
- 5th Gear
- Posts: 1101
- Joined: Wed Mar 28, 2012 3:27 pm
- Location: Uk
Post
by John Johnson » Fri May 02, 2014 2:20 pm
Just fitted mine .... Quality job not too bright but bright enough

Current toys in the garage
B7 avant in Daytona with ceramics and a few other goodies and lowwwww miles
Ur quattro. lago Blue
Ur quattro. Mars red
Rs1600i
Transit custom sportvan
http://youtu.be/FWBUl7oT9sA
-
RossDagley
- Top Gear
- Posts: 2334
- Joined: Mon Mar 17, 2014 11:53 pm
- Location: Bedford, UK
Post
by RossDagley » Sun May 04, 2014 11:00 am
Sorry if I've missed this anywhere - do the sidelights need canbus friendly/error free LEDs? Trups - can you supply these if needed?
Thanks!
Believe only the man who has nothing to gain from what he says.
2017 BMW M4 Competition Pack - Mineral Grey - 530ps by bootmod3, JCWeldfab exhaust.
Previously:
Renault Megane R26 - Liquid Yellow - 275ps.
2015 Audi Exclusive RS4 B8 - Merlin Purple - JCWF Exhaust
2009 Audi RS6 C6 - Phantom Black - 730ps MRC Tuned
2008 Audi RS4 B7 - Phantom Black - 449ps MRC Tuned
2002 Peugeot 106 Gti - Mauritius blue - 430ps Home built.
-
MikeFish
- Cruising
- Posts: 15588
- Joined: Tue Aug 31, 2010 9:23 pm
- Location: The Middle of Somewhere
Post
by MikeFish » Sun May 04, 2014 11:13 am
RossDagley wrote:Sorry if I've missed this anywhere - do the sidelights need canbus friendly/error free LEDs? Trups - can you supply these if needed?
Thanks!
Yes, sidelights will throw an error if the bulb fails. Think they are referred to as parking lights on the DIS.
-
Trups
- Trader (Expired)
- Posts: 1316
- Joined: Sat Jun 09, 2012 8:38 pm
Post
by Trups » Sun May 04, 2014 11:37 am
RossDagley wrote:Sorry if I've missed this anywhere - do the sidelights need canbus friendly/error free LEDs? Trups - can you supply these if needed?
Thanks!
Yes I can, the Cree 3 I have in are great, brightest 501 on the market and I've not seen any other seller with this type in the world yet.
They are £19 posted.
Trups
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.
If you have any quieries for interior or exterior LED's then get in touch.
-
sync24
- 5th Gear
- Posts: 1151
- Joined: Thu Dec 20, 2012 3:13 pm
- Location: Kent
Post
by sync24 » Sun May 04, 2014 9:31 pm
Has anyone got a spare set of original rear Avant number plate bulb holders by any chance? I don't seem to have mine anymore and obviously can't fit these bulbs as my current ones are sealed units. Thought I'd ask before I go order some from the stealers.
-
leadfoot
- 1st Gear
- Posts: 94
- Joined: Mon Oct 10, 2011 1:53 pm
- Location: Toronto, Canada
Post
by leadfoot » Sun May 04, 2014 10:31 pm
Finally after 2 years... No #^%*+€¥ing bulb errors for the ear LEDs.
I think I have the first Trumps plate LEDs in North America... And it has been worth the wait. This is after trying 4 different LEDs... All which had professed to be error free, which were not.
I must say, that anything LED in a car going forward will be from Trups!! I am a huge supporter of people that go out of the way to try to improve our cars... And actually deliver what they say they will. He has personally spent time and money to develop a solution... Which I feel is the best of an awkward situation with our cars.
Everything was 100% plug and play... AND no errors!!!
He was also a pleasure to deal with and shipping (to Canada) was amazing.
So... If your looking for anything LED...look no further!!!
Ps I have never raves about a vendor like this before.
Thanks again Mark
-
MikeFish
- Cruising
- Posts: 15588
- Joined: Tue Aug 31, 2010 9:23 pm
- Location: The Middle of Somewhere
Post
by MikeFish » Sun May 04, 2014 11:09 pm
Trups wrote:RossDagley wrote:Sorry if I've missed this anywhere - do the sidelights need canbus friendly/error free LEDs? Trups - can you supply these if needed?
Thanks!
Yes I can, the Cree 3 I have in are great, brightest 501 on the market and I've not seen any other seller with this type in the world yet.
They are £19 posted.
Trups
Trups are these error free or do they need a resistor / cancelling unit? I bought some a while ago but not sure if they were from you or not. My current ones need me turn turn lights off and on sometimes to cancel error and I can't remember where I put the most recent untested ones. I'm such a clutz.
-
Trups
- Trader (Expired)
- Posts: 1316
- Joined: Sat Jun 09, 2012 8:38 pm
Post
by Trups » Mon May 05, 2014 9:52 am
Mike,
Send me a picture of the led and I will tell you if they are from me, I only sell a couple of types for sidelights, the Cree 3 have built in canbus chips, if you are happy with the sidelights you have and they work then I do have an error free loom you can add to them to stop it doing it.
Trups
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.
If you have any quieries for interior or exterior LED's then get in touch.
-
leadfoot
- 1st Gear
- Posts: 94
- Joined: Mon Oct 10, 2011 1:53 pm
- Location: Toronto, Canada
Post
by leadfoot » Mon May 05, 2014 1:25 pm
Forgot to mention... The inclusion of the screws was icing on the cake.. As mine were stripped and had to be dremmel the last LED off the car. The screws are torx and fit better and are better quality than the OEM ones.
Who is online
Users browsing this forum: Google [Bot] and 113 guests