Door blade

[mojoe]

Finally managed to find one,but had to buy the complete door,and had some damage to the bottom edge.
My body Shop repaired the damage,and painted for £70.

[jamiej]

What happened to "Blic"?

Sent from my ONEPLUS A6013 using Tapatalk

[mojoe]

Finally managed to find one,but had to buy the complete door,and the bottom edge had some damage.
My body Shop repaired the damage and painted for £70

[S700REX]

Does anyone know what’s happened with these door blades being remade? Tried uncle Google but not having much luck!

[Miniboy]

Aye I’m also keen to find out. Mine has started bubbling away from the body.

[Look595]

I’ve made contact with ‘blic’ by all accounts they’ve been producing A4 b6 door trims no plans for the b7 platform.

[coffey555]

Does the B7 RS4 not use B6 door trims? Good info in the link below:

https://www.audizine.com/forum/showthre ... for-B7-RS4

Standard B6 items are the same as the B7 RS4.

[S700REX]

I’ve made contact with ‘blic’ by all accounts they’ve been producing A4 b6 door trims no plans for the b7 platform.

The cooking edition b6 is the closest to the b7 RS4 though there appears to be a very subtle difference. I’m not sure if anyone except the most fastidious of owners would notice any difference. I was parked next to a cooking spec b6 the other day and visually they are very similar. Didn’t quite have the balls to crack out a tape measure and see what the difference equates to size wise.

Getting to the point where if they get too much worse I’d accept a set of cooking spec b6 ones whilst keeping an eye out for someone taking on the challenge of reproducing the b7 RS4 ones.

If you see the link come up from ‘blic’ for the b6 ones could you please share to this thread?

[DavidRS4]

With 3D printing being so good these days, could we not get some original new ones. Then have them scanned and printed?

[*Will*]

Any news on whether blades are available? I’m looking for right front door - for a US car.

[Mark_b]

me too! just the passenger side front one for me though!

[Fatneck73]

Anyone kno if convertible blades are different? I assume yes. Anyone got any?

[Look595]

Convertible doesn’t have a bottom doorblade

[Look595]

I think a decent fabricator could replicate the convertible door design for a saloon/avant door. That’d certainly be a more permanent fix.

[Fatneck73]

Convertible doesn’t have a bottom doorblade

Oh ok. Whats this ‘called’ then plse? Tia