Suede steering wheel, gearknob&handbrake retrofit
-
- Neutral
- Posts: 8
- Joined: Sun Jul 06, 2008 7:40 pm
Suede steering wheel, gearknob&handbrake retrofit
having seen the suede finish on the steering wheel of that 62k Ibis white avant on pistonheads I'm curious to know has anyone retrofitted these?
http://www.pistonheads.co.uk/sales/439586.htm
I'd imagine the gearknob and handbrake would be easy enough but the steering quite tricky?
Would a company who refit leather seats be able to re stitch an existing wheel?
If I could this mod to an Rs4 I'm looking at buying it'd be the icing on the cake!
Paolo
http://www.pistonheads.co.uk/sales/439586.htm
I'd imagine the gearknob and handbrake would be easy enough but the steering quite tricky?
Would a company who refit leather seats be able to re stitch an existing wheel?
If I could this mod to an Rs4 I'm looking at buying it'd be the icing on the cake!
Paolo
RE: Suede steering wheel, gearknob&handbrake retrofit
I would like my wheel done also and have looked into it a bit. I have found a company that can supply a flat bottom multi function wheel much luke the R8 one and have emailed them to see if they can do it. I also wondered what the top of the dash would look like in suede, much like an Aston DBS!!!
RS4 Avant Avus Silver - With added APS
- PetrolDave
- Cruising
- Posts: 7599
- Joined: Mon Nov 07, 2005 11:28 am
- Location: Southampton, Hampshire UK
RE: Suede steering wheel, gearknob&handbrake retrofit
The only posts I've seen about the suede option were to complain that it wore out very quickly (few hundred miles only in one case)...
Gone: 2006 B7 RS4 Avant (Phantom Black)
RE: Suede steering wheel, gearknob&handbrake retrofit
Dave - thanks for that its something that has concerned me. Am I right in thinking Aston also fit a suede wheel? If so I can't imagine that their's would wear that quick.
RS4 Avant Avus Silver - With added APS
-
- Neutral
- Posts: 8
- Joined: Sun Jul 06, 2008 7:40 pm
RE: Suede steering wheel, gearknob&handbrake retrofit
I have read tat alcantara wears much better with steering wheels lasting 60,000 miles and only then needing to have bobbles shaved off.
Hs anyone on hear ha a CSL or M3 cs?
Hs anyone on hear ha a CSL or M3 cs?
The cost is £1900 for the three items from Gmbh. That was enough for me to stick with what I've got. This didn't include fitting. After a while the steering wheel can start to look really shabby. Used to own a CSL and shaved the bobbles off with a bic razor.
Nardo Grey RS6 Vorsprung 600 PS 2021 model
Nardo Grey RS6 Performance 605 PS. Titanium
Misano Red RS4 B8 450 PS
Phantom Black RS4 B7 444 BHP
Nardo Grey RS6 Performance 605 PS. Titanium
Misano Red RS4 B8 450 PS
Phantom Black RS4 B7 444 BHP
i had the Alcantara steering wheel on my RS6, it looked good until i had the car for 6 months then it started to wear at the sides where you grip the wheel, and in my opinion thats when it started to look tatty.I bought a leather RS6 steering wheel on Ebay and changed them over, now looks alot better
-
- Cruising
- Posts: 2990
- Joined: Thu Sep 04, 2003 1:45 pm
- Location: Swindon, Wilts
Re: RE: Suede steering wheel, gearknob&handbrake retrofi
Yes, the wheels don't last anywhere near 60k. I had 2 replaced by BMW under warranty - as they went all bobbley. Unfortunatey, it is the sweat in your hands that knackers them out. My third one was ok, but thats because I made sure I wore gloves on hot track-days.paolotopaz wrote:I have read that alcantara wears much better with steering wheels lasting 60,000 miles and only then needing to have bobbles shaved off.
Has anyone on hear had a CSL or M3 cs?
Porsche 997 GT3 - 2010/60
Porsche 997 GT2FS - 2008/58
Peugeot 205 1.9 GTI-S - 1991/J
Audi B7 RS4 Saloon - 2007/07
Audi Q7 3.0TDI - 2011/11
Alfa 147 GTA - 2003/53
Ford F150 Raptor - 2012/62
Porsche 997 GT2FS - 2008/58
Peugeot 205 1.9 GTI-S - 1991/J
Audi B7 RS4 Saloon - 2007/07
Audi Q7 3.0TDI - 2011/11
Alfa 147 GTA - 2003/53
Ford F150 Raptor - 2012/62
Who is online
Users browsing this forum: No registered users and 90 guests