Page 1 of 1
Turbo Pressure
Posted: Sun Jun 03, 2007 11:51 am
by Turbo Joe
What bar does the turbo on an S3 run at standard and modified to 270-275bhp? Cheers!
RE: Turbo Pressure
Posted: Wed Jun 27, 2007 7:44 pm
by dapster
A 210PS S3 should be about 0.8 bar peak. 225 about 1.1 IIRC. For 270-275bhp it would probably have to run ~1.5 bar at fairly high revs.
RE: Turbo Pressure
Posted: Mon Jul 23, 2007 1:33 pm
by PaulyS4
My friend has a modded S3 with a MRC map 3" milltek system, de-cat, jabba air induction,forge FMIC,forge dv and i get 20 psi and stays there till 5000 rpm and starts to drop of a slight bit. His car is 270-280 bhp