Turbo Pressure

1.8 I4 20v turbo - 207bhp
1.8 I4 20v turbo - 222bhp
Post Reply
User avatar
Turbo Joe
4th Gear
Posts: 506
Joined: Sun Nov 28, 2004 8:53 pm
Contact:
Contact Turbo Joe

Turbo Pressure

Post by Turbo Joe » Sun Jun 03, 2007 11:51 am

What bar does the turbo on an S3 run at standard and modified to 270-275bhp? Cheers!
SKN remap, K&N Filter, Miltek CatBack Twin Jet-
BHP under Construction!!!!
Top
dapster
Neutral
Posts: 19
Joined: Fri Nov 04, 2005 4:00 pm

RE: Turbo Pressure

Post by dapster » Wed Jun 27, 2007 7:44 pm

A 210PS S3 should be about 0.8 bar peak. 225 about 1.1 IIRC. For 270-275bhp it would probably have to run ~1.5 bar at fairly high revs.
Top
PaulyS4
1st Gear
Posts: 70
Joined: Thu Jul 19, 2007 7:24 pm
Location: Gloucestershire

RE: Turbo Pressure

Post by PaulyS4 » Mon Jul 23, 2007 1:33 pm

My friend has a modded S3 with a MRC map 3" milltek system, de-cat, jabba air induction,forge FMIC,forge dv and i get 20 psi and stays there till 5000 rpm and starts to drop of a slight bit. His car is 270-280 bhp
B5 RS4 MTM 420 bhp

Misano RS4 with some MTM magic!!
Top
Post Reply

Return to “S3 (Typ 8L) 1999-2003”

Who is online

Users browsing this forum: No registered users and 6 guests