Vehicle recieved the usual wash stages -foamed, washed, clayed etc etc
ENGINE BAY
The carbon fiber in the engine bay was not looking its best, all area's that I could access with a machine were done machine and remaining area's were done by hand. Plastics and rubber were treated with SV Pneu
50/50
Some "before and afters"
INTERIOR
Client asked me to look at the carbon fiber inserts on the drivers door as he catches them with his shoes when climbing in and out.
Before
After
The interior also seen the leather cleaned and protected using LTT and plastics wiped down with Einzett Cockpit Premium.
CORRECTION
Bulk of this was carried out using Menz 3.02 on a Megs Cutting pad whilst some areas only needed a polishing pad
Once all correction work was complete I refined the paint using Megs 205
For protection Zaino was used, 1 coat of AIO followed by 3 coats of Z2 applied to all paintwork including door shuts. Wheels were protected with AIO, 2 coats of Z2. Tyres dressed with Z16
THE END RESULT
Thanks for looking:thumb:
