Guys,
Looking to get front calipers refurbed. Looked at Brake Caliper Specialists but have seen some issues with communication and time scales.
Anyone had any recent contact with them / used their services? HAs turn around improved.
If not them, anyone esle got any recommendations.
Thanks
Kev
Caliper refurbs - who to trust
Caliper refurbs - who to trust
C6 RS6 Saloon - Daytona Grey - ceramics, stage 2, gearbox map, quad tip miltek, pre cat delete and Mrc filters = 753ps + 1052NM ex kent_andy
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: Caliper refurbs - who to trust
I used a company called Godspeed Brakes, I was very happy with the refurbishment of my steel brake callipers - polished pistons, new seals, new fixings and machined mounting faces etc. Only minor gripe was the RS decal being a bit heavy duty and stuck on last. They claimed to get the best calliper finish they could only stick this decal on afterwards. I guess with the decal on the top, then at least it can be replaced as and when required.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: Caliper refurbs - who to trust
You can't go wrong with Godspeed Brakes. http://www.godspeedbrakes.co.uk/
I had a set of Brembo calipers done by them and they were absolutely faultless, even down to the logo. They often update their Facebook page with refurb examples - worth having a look.
I wouldn't go anywhere else for braking parts when I had the Impreza.
I had a set of Brembo calipers done by them and they were absolutely faultless, even down to the logo. They often update their Facebook page with refurb examples - worth having a look.
I wouldn't go anywhere else for braking parts when I had the Impreza.
Re: Caliper refurbs - who to trust
Godspeed sound good but what is the turnaround time like guys?
C6 RS6 Saloon - Daytona Grey - ceramics, stage 2, gearbox map, quad tip miltek, pre cat delete and Mrc filters = 753ps + 1052NM ex kent_andy
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
Re: Caliper refurbs - who to trust
I've used these guys before
http://www.brake-caliper-painting.com
They are good..but turn around time was around 2weeks
http://www.brake-caliper-painting.com
They are good..but turn around time was around 2weeks
Re: Caliper refurbs - who to trust
Spoken to both and think I will go with Godspeed.
Both quoted 10 days maximum turnaround with a7 day more than likely.
However, BCS were about £300 higher despite Godspeed manufacturing the Pistons out of stainless rather than the chrome plated steel ones from Alcon.
As they are 8 pot calipers that's a bloody lot of Pistons lol...
Both quoted 10 days maximum turnaround with a7 day more than likely.
However, BCS were about £300 higher despite Godspeed manufacturing the Pistons out of stainless rather than the chrome plated steel ones from Alcon.
As they are 8 pot calipers that's a bloody lot of Pistons lol...
C6 RS6 Saloon - Daytona Grey - ceramics, stage 2, gearbox map, quad tip miltek, pre cat delete and Mrc filters = 753ps + 1052NM ex kent_andy
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
1955 Chevrolet BelAir - 5.8 Lt1 + Procharger = 545bhp
Who is online
Users browsing this forum: No registered users and 34 guests