RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hello,

I'm a new member from Australia!

I joined as I recently purchased an RS6 which will become a project car and need some assistance in finding the following resources:

1. Exploded diagrams of engine so I can identify parts and gaskets etc.
2. Service/repair guide for engine regarding clearances, torques etc
3. Online elsawin resource. I used to visit a site which gave you access to the diagrams and service manulals which looked like an online version of Elsawin other than it was European I can't remember it. Anyone know?

I would also appreciate any other information that can be provided, at this point in time I am planning to freshen up the engine so I need to know as much info as possible about it so I can get it done ASAP.

Thanks in advance!!

Welcome, the resource that is like Elsawin you're thinking of is called 'VAGCAT'.

You are thinking of Elsaweb:

http://elsaweb.spaghetticoder.org/

Vagcat is the online version of the parts catalogue.

Shoppinit wrote:You are thinking of Elsaweb:

http://elsaweb.spaghetticoder.org/

Vagcat is the online version of the parts catalogue.

Why have I only just found this website now!?

Audioz wrote:Hello,

I'm a new member from Australia!

I joined as I recently purchased an RS6 which will become a project car and need some assistance in finding the following resources:

1. Exploded diagrams of engine so I can identify parts and gaskets etc.
2. Service/repair guide for engine regarding clearances, torques etc
3. Online elsawin resource. I used to visit a site which gave you access to the diagrams and service manulals which looked like an online version of Elsawin other than it was European I can't remember it. Anyone know?

I would also appreciate any other information that can be provided, at this point in time I am planning to freshen up the engine so I need to know as much info as possible about it so I can get it done ASAP.

Thanks in advance!!

FON.

Where in Oz are you from, maaate?

bam_bam wrote:

Audioz wrote:Hello,

I'm a new member from Australia!

I joined as I recently purchased an RS6 which will become a project car and need some assistance in finding the following resources:

1. Exploded diagrams of engine so I can identify parts and gaskets etc.
2. Service/repair guide for engine regarding clearances, torques etc
3. Online elsawin resource. I used to visit a site which gave you access to the diagrams and service manulals which looked like an online version of Elsawin other than it was European I can't remember it. Anyone know?

I would also appreciate any other information that can be provided, at this point in time I am planning to freshen up the engine so I need to know as much info as possible about it so I can get it done ASAP.

Thanks in advance!!

FON.

Where in Oz are you from, maaate?

Hey mate, I'm in Sydney and yourself ?

He is darn landun. Or up landun from yourself.

Audioz wrote:

bam_bam wrote:

Audioz wrote:Hello,

I'm a new member from Australia!

I joined as I recently purchased an RS6 which will become a project car and need some assistance in finding the following resources:

1. Exploded diagrams of engine so I can identify parts and gaskets etc.
2. Service/repair guide for engine regarding clearances, torques etc
3. Online elsawin resource. I used to visit a site which gave you access to the diagrams and service manulals which looked like an online version of Elsawin other than it was European I can't remember it. Anyone know?

I would also appreciate any other information that can be provided, at this point in time I am planning to freshen up the engine so I need to know as much info as possible about it so I can get it done ASAP.

Thanks in advance!!

FON.

Where in Oz are you from, maaate?

Hey mate, I'm in Sydney and yourself ?

Born in South Sydney, raised in Forster/Tuncurry on the mid-north coast. Started at Sydney uni but finished in UTS. Left for European travel in 2000 now live in London, still have a semi-detached in Newtown, Syd.

What are your plans for the beast? Do you have any idea what a heavily MRC modified C5 would fetch back in Oz? I've almost given up on shipping it home, I'm too attached and now I have a 3 month old son, big travel seems a distant memory.

When you say heavily modified what do you mean?

- Stage 3 MRC map, 650 hybrids w K06 billet comp wheels, custom 70/60mm intakes, Wagners coolers, plus spec extra radiators, custom tubular extractors, CATless race DPs into 3" straight pipe (valved), meth injection.
- RNS-E
- Full C6 RS brakes (390mm / 6pot)
- Bilstein PSS9s
- Hotchkis swaybars
- A.C.E. TC
- 605PS / 853Nm

Bit of a " That's not a knife, this is a knife " moment there.

I forgot compression lowering gaskets.

Sexy spec.

chunky79 wrote:Bit of a " That's not a knife, this is a knife " moment there.

I think that's the first time I've written my spec on this forum, I feel like a show off now *tries to clear the blood in the water around himself*

bam_bam wrote:- Stage 3 MRC map, 650 hybrids w K06 billet comp wheels, custom 70/60mm intakes, Wagners coolers, plus spec extra radiators, custom tubular extractors, CATless race DPs into 3" straight pipe (valved), meth injection.
- RNS-E
- Full C6 RS brakes (390mm / 6pot)
- Bilstein PSS9s
- Hotchkis swaybars
- A.C.E. TC
- 605PS / 853Nm

How many vomitting passengers so far?