RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

As I have just exchanged my RS6 I now have a quantity of spares that I have accumulated during the 3 years of ownership.
It's just a quick list to see if anyone's interested in any of it. If so I can take pictures etc etc.


Pair of OEM downpipes good condition £150

Sold - 4 Parking sensors £20

Miltek spare chrome exhaust tips and clamps rs6 £60

Torque converter bought from forum member 'Keaney' as in full working condition £150

Sold- Gearbox ( apparently stuck in reverse) £150

Top and bottom front grills VGC £120

Pair of front wheel arch liners £35

Pair of OEM Intercoolers (need Jb welding) £120

Headlights I have 5 or 6 I think all glasses intact with ballasts . Some have a locator tab broken or adjustment wheel missing but all adjusters work . Some completely intact.

Sold -Nearside dimming Mirror glass ( see recent forum discussion) I think it's ok and will work but others have questioned that- worth a punt at £25

4 OEM 19 alloy Wheels rough condition need refurbishing tyres are no good !£60 each
Wheel 2 (see pictures) provisionally sold
Wheel 4 provisionally sold

Rs6 high quality indoor cover - actually for a c7 avant but fits a c5 well ,grey fleece microfibre with Audi ring and rs6 logos .These cost at least £250 new -£100

Sold- Bentleys Rs6 manual £35

Rs6 hardback book full of rs6 pictures and specs excellent condition £20

Front nearside door in mugello, includes window glass and mechanism £35

Front offside door in mugello includes window glass and mechanism £35

Pair of small side grills £30

Cargo net £20

Full set of mats. Drivers one is worn where the heel goes others are good condition £15

Full set of walnut wood trims £60

The plastic trim that goes across the rear of the engine bay that has a circular hole for the expansion tank lid (from memory) and a removable rectangular lid( no lid) £10 (not

Starter motor used but was working when removed from donor car £20

Spare carbon fibre engine cover( the small one at the front of the engine with two retaining clips £20

Thanks for looking

I'll take the Bentley manual please mate

I'll take the parking sensors please

What are the best L & R lights like & how much? Can you post...

Cbardell wrote: ↑

Fri Feb 24, 2017 10:21 pm

I'll take the Bentley manual please mate

jangol wrote: ↑

Fri Feb 24, 2017 10:48 pm

I'll take the parking sensors please

MattV8 wrote: ↑

Sat Feb 25, 2017 12:16 am

What are the best L & R lights like & how much? Can you post...

Pm's sent as above

Second dibs in the Bentley manual. Would you split the wheels?

Nobby wrote: ↑

Sat Feb 25, 2017 9:44 am

Second dibs in the Bentley manual. Would you split the wheels?

Yes re splitting the wheels, noted re the manual.

I think I may have a pair of the small side grills as well if anyone's interested

Pete, I would be interested in the gearbox and a wheel if you are splitting?

Cargo net as well £20

I would take a wheel providing its not buckled or cracked.
I can arrange a courier if you are happy to send out.

Couple more bits I've found

Full set of mats. Drivers one is worn where the heel goes others are good condition £15
Full set of walnut wood trims £60
The plastic trim that goes across the rear of the engine bay that has a circular hole for the expansion tank lid (from memory) and a removable rectangular lid( no lid) £10 (not postable)
Starter motor used but was working when removed from donor car £20
That's it for now

=6]IMG_0740.JPG[/attachment]]

Pictures of wheels as requested numbered for I'd purposes

Spare carbon fibre engine cover( the small one at the front of the engine with two retaining clips £20

pete62 wrote: ↑

Sun Feb 26, 2017 2:28 pm

Couple more bits I've found

Full set of mats. Drivers one is worn where the heel goes others are good condition £15
Full set of walnut wood trims £60

Good luck moving them on chief...