Hi,
I need some new mats, anybody bought any recently that will fit properly?
Thanks,
James
Floor mats
Re: Floor mats
I bought these:
http://www.ebay.co.uk/itm/200948922157
And I'm happy with them - they fit well and look smart.
http://www.ebay.co.uk/itm/200948922157
And I'm happy with them - they fit well and look smart.
"not a professional engineer, mechanic and mechanist"
-
rootytooty
- Neutral
- Posts: 11
- Joined: Mon May 04, 2015 6:01 pm
Re: Floor mats
Thanks..MattV8 wrote:I bought these:
http://www.ebay.co.uk/itm/200948922157
And I'm happy with them - they fit well and look smart.
How is the logo part on them? Looks like an iron on patch?
Re: Floor mats
No. Embroidered,
They really are quite nice for the money.
They really are quite nice for the money.
"not a professional engineer, mechanic and mechanist"
-
rootytooty
- Neutral
- Posts: 11
- Joined: Mon May 04, 2015 6:01 pm
Re: Floor mats
ThanksMattV8 wrote:No. Embroidered,
They really are quite nice for the money.
Re: Floor mats
I'm not being funny, but have you looked closely at the logos on those ebay photos?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: Floor mats
No, fortunately, but I have looked slightly more closely at the ones in my car. 
The logo is embroidered into a black panel which is stitched onto the carpet.
The US guys just did a bulk order for LHD sets:
http://www.rs6.com/showthread.php/31791 ... ble/page15
The logo is embroidered into a black panel which is stitched onto the carpet.
The US guys just did a bulk order for LHD sets:
http://www.rs6.com/showthread.php/31791 ... ble/page15
"not a professional engineer, mechanic and mechanist"
Re: Floor mats
Hi
New member here
(defected from Saabs) and am collecting my C5 RS6 Avant at the weekend. I too wanted some decent quality, reasonably priced mats and stumbled across the ones above. I also noticed the picture appears to show the logo sitting on top of the mat and e-mailed the seller requesting clarification. The response was "Hi, the designs are embroidered onto felt and then sewn onto the carpet, thanks, George."
The photo was taken before the logos are permanently fixed to the carpet, although it would be prudent to update the photo as I suspect it might put people off. Having said that, their feedback is good so I'm going to take the plunge too.
Just got to decide on what colour edging to opt for now...
Cheers
Ben.
New member here
(defected from Saabs) and am collecting my C5 RS6 Avant at the weekend. I too wanted some decent quality, reasonably priced mats and stumbled across the ones above. I also noticed the picture appears to show the logo sitting on top of the mat and e-mailed the seller requesting clarification. The response was "Hi, the designs are embroidered onto felt and then sewn onto the carpet, thanks, George."The photo was taken before the logos are permanently fixed to the carpet, although it would be prudent to update the photo as I suspect it might put people off. Having said that, their feedback is good so I'm going to take the plunge too.
Just got to decide on what colour edging to opt for now...
Cheers
Ben.
Current:
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
Re: Floor mats
From what the guys in the U.S. say about them they are happy with the mats, but there is stitching overrun around the logo. I may get a set just to prolong the life of the O.E ones in there at the moment.
- Attachments
-
-
Re: Floor mats
On mine, the stitching did not overrun.
"not a professional engineer, mechanic and mechanist"
-
SchrickRS6
- 2nd Gear
- Posts: 140
- Joined: Sun Mar 01, 2015 6:14 pm
- Location: Sweden - Sundsvall
Re: Floor mats
I think you very nearly slipped under the FON radar of most....not mine though.blm70 wrote:Hi
New member here
The photo was taken before the logos are permanently fixed to the carpet, although it would be prudent to update the photo as I suspect it might put people off. Having said that, their feedback is good so I'm going to take the plunge too.
Just got to decide on what colour edging to opt for now...
Cheers
Ben.
You are going to love that torque! Anyway....
FON.
Obligatory pics please.....as per the rules.
Thanks
J
Current :Audi RS6 2016 PE Ascari Blue
Previous: BMW's, Mainly M5's E34-F10 and an Alpina B8, with a few Cozzies thrown in.
J
Current :Audi RS6 2016 PE Ascari Blue
Previous: BMW's, Mainly M5's E34-F10 and an Alpina B8, with a few Cozzies thrown in.
Re: Floor mats
FON.blm70 wrote: stuff.....
I'm ex Saab too. Tuned many a B204 in my time
Recycling dinosaurs for fun
Re: Floor mats
Ha! Thanks Schrick. My FON collections is getting healthier by the minuteSchrickRS6 wrote:
I think you very nearly slipped under the FON radar of most....not mine though.
You are going to love that torque! Anyway....
FON.
Obligatory pics please.....as per the rules.
Some pics in the link in my post above, reposted here
Current:
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
Re: Floor mats
And what an engine, the B2*4 is... (sorry, going off topic now.)sweegie wrote:FON.blm70 wrote: stuff.....
I'm ex Saab too. Tuned many a B204 in my time
Current:
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
TT Mk1, 225 Quattro Misano Red, AmD map
Former:
RS6 Avant 2004, MRC Stage 1+, Bilstein Coilovers, Milltek & s/s downpipes
Saab 9000 Aero 1997, GT3071, Siemens Dekka 630s, Forge 50mm i/c, 3" downpipe, Maptun stainless header, Konis, Quaife lsd, a/c deleted, 4.05 ratio 'box, custom map, 470hp & 440lb/ft.
Saab 9-3 Aero Estate 2.8 v6 2006, 3" stainless downpipe & remap, 302hp & 380lb/ft.
Rouse Sport 304R Sapphire Cosworth 1990 (stock), 260hp & 300lb/ft.
Re: Floor mats
It's the C5 forum mate, you're allowed to go of topic (appreciate it if it happens earlier in the thread though 
)
)previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Who is online
Users browsing this forum: srichards and 83 guests