introduce & look for photo's OE harness/hose layout engine

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
User avatar
audi_driver79
4th Gear
Posts: 598
Joined: Fri Feb 04, 2011 12:55 am
Location: Teesside / N. Yorks

Re: introduce & look for photo's OE harness/hose layout engi

Post by audi_driver79 » Sun Nov 08, 2015 2:24 am

I'm guessing that engine could be described 'as new'? Phenomenal is the word..... :notworthy:
C5 RS6 Avant Mugello Blue, Original Springs.
1997 Audi Cabriolet 1.8 for when its Sunny!
2001 A2 1.4tdi 75bhp.

User avatar
AudiS2700Hp
Neutral
Posts: 37
Joined: Sun Sep 06, 2015 8:59 pm

Re: introduce & look for photo's OE harness/hose layout engi

Post by AudiS2700Hp » Mon Dec 07, 2015 7:24 pm

Thank!

Got more work done!
Attachments
IMG_1827.JPG
IMG_1832.JPG
IMG_1851.JPG
IMG_1856.JPG
IMG_1861.JPG
IMG_1868.JPG
IMG_1869.JPG
IMG_1873.JPG
IMG_1881.JPG
IMG_1882.JPG
IMG_1892.JPG
IMG_1895.JPG

User avatar
ChrisRS6
3rd Gear
Posts: 338
Joined: Tue Aug 17, 2010 12:03 pm
Location: Gloucestershire

Re: introduce & look for photo's OE harness/hose layout engi

Post by ChrisRS6 » Tue Dec 08, 2015 10:00 am

100 man-points awarded!

Fantastic work! :beerchug:
*SOLD* - currently looking for a replacement
03 Missano Red Avant
Silver Leather, H&Rs, Dension iPod Connection kit
85k miles

User avatar
AudiS2700Hp
Neutral
Posts: 37
Joined: Sun Sep 06, 2015 8:59 pm

Re: introduce & look for photo's OE harness/hose layout engi

Post by AudiS2700Hp » Sun Dec 27, 2015 8:12 pm

Thanks!

Engine is in! Already turned the engine to get oil-pressure and did a compression test. The compression was 13bar. Audi says it need to be 7-13 so it is very good :rocker:

If everything goes right i will try to start it tomorrow. :drink:
Attachments
1.JPG
2.JPG
3.JPG
4.JPG
5.JPG
6.JPG
7.JPG
8.JPG
9.JPG
10.JPG
11.JPG
12.JPG
13.JPG
14.JPG
15.JPG
16.JPG
17.JPG
18.JPG
19.JPG

bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: introduce & look for photo's OE harness/hose layout engi

Post by bam_bam » Sun Dec 27, 2015 8:51 pm

Respekt.
No matter where you go, there you are.

User avatar
Shoppinit
Cruising
Posts: 20285
Joined: Wed Dec 31, 2008 6:24 pm

Re: introduce & look for photo's OE harness/hose layout engi

Post by Shoppinit » Sun Dec 27, 2015 9:38 pm

Lovely.

I wish I had that workshop.

Looking forward to driving it much?
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
AudiS2700Hp
Neutral
Posts: 37
Joined: Sun Sep 06, 2015 8:59 pm

Re: introduce & look for photo's OE harness/hose layout engi

Post by AudiS2700Hp » Wed Dec 30, 2015 7:09 pm

Started the engine and it runs good!

The plan was to sell the car after i fixed it. But i still dont know if i'm able to sell it :drink:


Droobui
Neutral
Posts: 15
Joined: Wed Dec 23, 2015 8:11 pm

Re: introduce & look for photo's OE harness/hose layout engi

Post by Droobui » Sun Jan 03, 2016 10:26 pm

Well done m8, you have my total admiration :notworthy:

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: No registered users and 107 guests