My RS4 aka VINNIE thread

Start a topic to show off your car or keep us updated on your journey
User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: My RS4 aka VINNIE thread

Post by pule333 » Tue Oct 11, 2016 7:27 pm

Updated the needles. Much happier now :)Image
ImageImage
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: My RS4 aka VINNIE thread

Post by Lukes3 » Fri Oct 21, 2016 10:04 pm

Looks mint mate, really good dont think i am brave enough to have a ago at the clocks lol
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: My RS4 aka VINNIE thread

Post by MikeFish » Fri Oct 21, 2016 10:32 pm

Yeah that looks much better now!

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: My RS4 aka VINNIE thread

Post by Lukes3 » Sat Oct 22, 2016 6:27 pm

Can the red millage an clock be changed to white like in the new models
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: My RS4 aka VINNIE thread

Post by pule333 » Sat Oct 22, 2016 7:44 pm

Lukes3 wrote:Can the red millage an clock be changed to white like in the new models
No unless you swap the screen for each unit but than I am not sure if it will even fit or work afterwards.
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

My RS4 aka VINNIE thread

Post by pule333 » Wed Oct 26, 2016 4:52 pm

Did a gearbox and rear diff Oil change. Went with Gulf 75w90 from Opi oils.
Also flushed my brake fluid again :) 3rd complete change in under 6 months.
This time it's RBF600.
Image
And fitted Trups bulbs for DRL
Very easy fix! Love how it looks now!
Need to change my HiD bulbs to something a bit less chav. Have 12k right now! What was I thinking????ImageImageImage
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: My RS4 aka VINNIE thread

Post by Jules » Wed Nov 23, 2016 4:01 pm

Wow just read right through this and fair play, really good to see people getting their hands dirty and
doing all the work themselves.
I try and do a lot but not the engine work that scares me lol.
Really liking the wheels and ride height, clocks are very cool not something I would have even thought of.

The arbs I usually go with H+Rs, how do you find the einbach and are they any cheaper with being
listed as just A4 instead of RS4 ?

Keep up the good work :thumbs:
Drive low,park lower

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: My RS4 aka VINNIE thread

Post by pule333 » Wed Nov 23, 2016 4:17 pm

Jules wrote:Wow just read right through this and fair play, really good to see people getting their hands dirty and
doing all the work themselves.
I try and do a lot but not the engine work that scares me lol.
Really liking the wheels and ride height, clocks are very cool not something I would have even thought of.

The arbs I usually go with H+Rs, how do you find the einbach and are they any cheaper with being
listed as just A4 instead of RS4 ?

Keep up the good work :thumbs:
Thanks mate Image
I enjoy working on cars. Find it very therapeutic ;)
Arbs are as good as H&R unfortunately price is the same I think. I had them on my A4 and simply swapped over. The only difference is that the front one is not adjustable and at it's hardest setting compared to H&R all the time.
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

My RS4 aka VINNIE thread

Post by pule333 » Wed Nov 30, 2016 2:27 pm

Update time :)
So after I had that little curb accident few weeks back, I decided that it's not worth the effort to just fix and paint single wheel (since I always wanted gold/bronze wheels for this car) I decided this was a sign from above and pulled a trigger on all 4 being done. The color I picked is Mitsubishi 2002 titan gold.
They came out rather well me think :)
ImageImageImageImageImage
Image
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
AlexB7RS4
2nd Gear
Posts: 156
Joined: Sat Jul 30, 2016 10:43 pm

Re: My RS4 aka VINNIE thread

Post by AlexB7RS4 » Fri Dec 02, 2016 3:24 am

Nice :D Just put bronze wheels on meself. Love them on the Avant.

User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: My RS4 aka VINNIE thread

Post by Jules » Fri Dec 02, 2016 4:08 pm

Liking that mate and and a fan of the bronze, just in a couple of pics I feel maybe the rails should be wrapped
in a similar colour or satin black maybe ?
Image
Drive low,park lower

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: My RS4 aka VINNIE thread

Post by pule333 » Sat Dec 03, 2016 2:01 am

Jules wrote:Liking that mate and and a fan of the bronze, just in a couple of pics I feel maybe the rails should be wrapped
in a similar colour or satin black maybe ?
Image
Thanks bud. Here is one more to the mix ;) Image
And yes already have a set of spare rails at my painters ;)
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

iconic78
3rd Gear
Posts: 459
Joined: Mon Nov 07, 2016 5:55 am

Re: My RS4 aka VINNIE thread

Post by iconic78 » Sat Dec 03, 2016 12:42 pm

Nice build thread. Well done

User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: My RS4 aka VINNIE thread

Post by pule333 » Sun Dec 04, 2016 11:59 am

Since ordering the 6500k bulbs and clear lenses from @Trups they been sitting in the garage collecting dust. So last night decided it's as good time as any to install them + painting few bit.
I have to say installing lenses wasn't as straight forward as I though.
Used a cardboard box for makeshift oven to soften the glue.
Image
Decided I wanted inner plastic to be sprit blue :) ImageImage
Royal PITA ImageImageImage
Half way through the job Image
End result :) me like itImageImage
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness

User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: My RS4 aka VINNIE thread

Post by Covkiller » Sun Dec 04, 2016 7:06 pm

Looking good Ilya, I know messing around with headlights is a pain in the arse.
Got to take mine out and give the inside of the lenses a wash as condensation has fogged them a little.
Last edited by Covkiller on Fri Dec 09, 2016 6:57 pm, edited 1 time in total.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3

Post Reply

Return to “Readers' Rides”

Who is online

Users browsing this forum: No registered users and 135 guests