RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

OK, so this is quite a hot topic at the moment, so I thought I should share my install with you guys - it's easier than you might think, but there again I was too lazy to do it myself!

I got hold of a universal catch can from a friend - it's like this one from ebay that goes for around £30 .... http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0247678060

now where do I mount it?



Can you see what it is yet (spoken in an australian twang)



With the power steering fluid cover removed (there is nothing underneath, so ideal for hiding it away). The cover needs trimming slightly at the back BTW.



Cut the hose going to the bottom of the PCV valve and extend it to one of the inlets on the catch can.



Now add a return line back to the PCV valve.

Job done & looks pretty OEM once it's hidden by the cover.

Thats the simplist way .... nice ...
does the catch can have baffles insde and do the feed/return'shave different lenght pipes inside ... or they just end connectors on the can ...?

cheers d

Nice work Nige, I'm thinking of adding one of these myself.