RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Does anyone have part numbers or suggestions on where to source new HPFP from?

Having the same issue in my 2014 RS6, and I'm guessing its exactly the same as other owners have reported.

In my experience it goes very high, if you set to Comfort, then click Raise, the guard gap is 100mm +

Honestly , I’d avoid them. Had the resonated set sent to oz , sound glorious on WOT BUT insane amount of drone an packing fiberglass firing out from the rear Centre resonator. Shoddy workmanship - I lost a lot of cash on this mistake. Go Miltek. Was there lots of drone when you had the rear muffler...

I have the Non-res Scorpion and front delete pipe due to arrive in the next few weeks, so will post a video once its fitted. But from the Youtube comparison, that convinced me to go for the Scoprion over the Miltek as I liked the sound a lot more. And I had read about several Miltek owners complaini...

Interesting, as I have driven the current tank of 98RON fuel as conservatively as possible, and achieved 420km for full tank, 262Miles, it has been tuned and doesn't run the 4 cylinder shutdown or turn off at the lights anymore, but the best numbers I can achieve are 11.5-11.8 L/100 in open road cru...

Hey guys, was just wondering what kind of range people are getting out of a full tank on a RS6, once filled it comes up with 600kms range, but havent achieved anywhere near this.

Majority of round town commute, and not leaning on it much at all.

Has anyone had any experience in refilling or having their air suspension serviced and adding Nitrogen?

Have been advised the slow operation of the level changes could be related to the low nitrogen level?

Or they are just slow?

It can rub with a 21" also, the overall diameter of a 285/30/21 tyre and 295/25/22 is less than 1% difference.
With the CETE air control its not an issue as can customise the height to ensure no rubbing.

Does seem unusual they havent made the effort to at least make a sound bite for the resonated version.

Wanting some advice around the Scorpion exhaust system, im not doing downpipes, just the front Resonator delete at the moment, is the non resonated rear system livable? With the valves closed is it ok for highway driving? Or still a noisy exhaust? Or is the resonated system with the front delete and...

The software option only gives a 15mm drop from what I understand, the Links can allow up to 50-55mm drop.

And if you get fully adjustable versions, you can tune the height you want.

Steel version, i have just ordered the wheels, so can give you an update once they arrive to give you exact fitment. The 10p front I am planning on machining 2-3mm to give a 12-13p offset to best suit the fitment. Also ordered front upper camber bushes to allow some extra front camber to give more c...

Yes so they do a 22x11" in either 10p or 20p, i have ordered 10p for the front (for brake clearance) and 20p for the rear to avoid any chance of rubbing.

Ferrada wheels say yes only a 5mm is required, but they also have 10p that requires no spacer.

I have just fitted the CTS Turbo lowering links, and lowered the car approx 35mm lower than the Dynamic factory mode. Sitting on 21" factory wheels and 285/30/21 tyres, so the tyre is just inside the rear fender and just above the tyre on front fender. Ride quality def a lot firmer, but still rides ...