Search found 10 matches

by Ashventini
Sat Jun 23, 2018 10:42 pm
Forum: Audi S and RS Ownership
Topic: MIlltek Chirping sound C7 RS7
Replies: 5
Views: 6765

MIlltek Chirping sound C7 RS7

After only 2 weeks of having my RS7 I fitted a MIlltek non resonated cat Back (with standard downpipes kept) as it was too tame as standard set up. Really loved the change in sound and the popping and banging. However I have since noticed over the last few week this strange "chirping" "tweeting" typ...
by Ashventini
Tue Jun 05, 2018 11:15 pm
Forum: Welcome Area
Topic: Wear sensors on RS7 Brakes
Replies: 1
Views: 666

Wear sensors on RS7 Brakes

Guys, Simply how many does the RS7 have. 1 sensor wire per wheel or 1 for each pad? I am guessing 1 per wheel (front and back)? Are the Brembo pads for this car (RS6/RS7) C7 model the best to buy? I Don't see the point buying from Audi directly as I have just looked at the removed OEM ones and they ...
by Ashventini
Mon May 28, 2018 9:47 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

I did the same on my C6 and sold it after 3years with the plates still on. I thought the same, drilling a 10mm hole would weaken the caliper. My C6 had 750bhp and that took some hard braking to stop with no issues. The C7 is standard with a mere 570 bhp😢😢 Hi. I am leaning towards this way also. Do ...
by Ashventini
Mon May 28, 2018 9:44 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

I did the same on my C6 and sold it after 3years with the plates still on. I thought the same, drilling a 10mm hole would weaken the caliper. My C6 had 750bhp and that took some hard braking to stop with no issues. The C7 is standard with a mere 570 bhp😢😢 Hi. I am leaning towards this way also. Do ...
by Ashventini
Mon May 28, 2018 3:13 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

I drilled and tapped mine, attached with a pair of small cap-heads. I didn’t fancy drilling two 10mm holes in the caliper as there’s not a lot of meat there, and personally felt it was going to weaken the caliper on my C6. what size did you drill M6? What depth? I was thinking 6mm... Also did you u...
by Ashventini
Sun May 27, 2018 8:52 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

skirs6 wrote:
Sun May 27, 2018 6:59 pm
Not the best pic but you can see the black filler around the edge as obviously there is no recess 👍

92F9C008-5FCA-4805-AC62-7E70A2AFC7A0.jpeg
And also does this mean they are now bonded and not removable? Do you need to remove to replace pads etc?
by Ashventini
Sun May 27, 2018 8:50 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

Not the best pic but you can see the black filler around the edge as obviously there is no recess 👍 92F9C008-5FCA-4805-AC62-7E70A2AFC7A0.jpeg Thanks. I can see the filler. Looks like quite a lot of it which makes me wonder why so much? Does the plate not sit flush to the calliper? I know there is n...
by Ashventini
Sat May 26, 2018 9:39 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

great advice. I think buying the red pre-drilled ones is quite wasteful in my opinion. just seems a bit excessive. im fairly capable so I will follow the advice on the template, thanks guys
by Ashventini
Fri May 25, 2018 11:25 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

Re: RS7 - Rear Calipers name plate Mod

Ash I had this done on my C6 and now my C7 it’s really worth doing just make sure the drill bit is good quality. I used a template. On my C7 I also put a bit of metal filler in black around the edges. I’ll post up a coup,e of pics tomorrow. Well worth doing for little expense 👍 Great. exactly the s...
by Ashventini
Fri May 25, 2018 10:19 pm
Forum: Welcome Area
Topic: RS7 - Rear Calipers name plate Mod
Replies: 15
Views: 3659

RS7 - Rear Calipers name plate Mod

Gents. I know this has been covered I limited discussion before. I am a new owner of a 2015 RS7 in Mythos Black. Had it 2 weeks and am learning about the various things and options it has or hasn't more relevantly. So the rear name plates that my black calliper does not have. I seen all the debates ...

Go to advanced search