RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Just thought I'd let you guys know I originally thought I had a clicking wheel bearing issue but it actually ended up just being the heat shield that covers the exhaust and centre drive shaft.

New wheels (Koya SF07 semi-forged in 20x10. +30), gloss black grille and gloss black vinyl trimming for the window surrounds and roof rails.

Next will be to drop the car 25mm.

Im guessing you need the mechatronics unit too to make this work for either the c7 8 speed or q7 8 speed. Also would these boxes be able to hold the torque produced by the RS6 v10t?

I'm looking at going black optics on my RS6 and I was under the impression that S6 owners bought RS6 grilles to get the honeycomb RS grill look and that A6 owners bought S6 grilles for the S line look. I've bought a cheap eBay black grille meant for A6/S6 with the honeycomb RS thinking it would fit ...

RossH14 wrote: ↑

Tue Dec 19, 2017 11:25 pm

if i have it right :
https://www.strongflex.eu/en/rs6-c6-04- ... 25182.html
part no 021773 and 021774

Thank you RossH14!

Do you have normal VCDS? You need to measure the fuel pressure in high pressure contour. After turning on ignition (w/o engine start) it should rise. If not - injectors are leaking. If it rise - this is not an injector problem and better to check sensors. Yes I have VCDS, but had the car in for a m...

After some research it looks like the part number for our injectors is 079906036C and manufactured by Hitachi as OEM.

The Hitachi injector can also be found in the following models too
A6
A8
Q7
R8
S5
TOUAREG

...no need for the RS tax.

i cheated and went polybush and IMHO the difference is rubber bush (not the ball joint or arm itself) ..StrongFlex and am very pleased with the car just feeling 'tighter'. but be warned changing everything is not a weekend job https://forum.rs246.com/viewtopic.php?f=47&t=118103&start=15 Tough job a...

sounds like lazy 02s if its light load and highway driving. O2s are A OK, seems to be it's an injector issue but would assumed any stage 1,2 or 3 cars will decrease the life expectancy of their o2s with pushing richer and hotter exhaust gasses pass them. 1st change fuel filter - it's a seperate par...

Sorry to re-hash an old subject but I'm wondering if anyone can confirm if the Meyle HD kit for the C6 S6 will fit our RS6? This is the the Meyle part number and link for the whole C6 S6 HD kit Part no. 116 050 0095/HD https://web2.carparts-cat.com/default.a ... 004&12=140 I've read conflicting info...

Adam did you end up finding out what your misfiring issue was? I've got the exact same issue and have changed plugs, cleaned my MAP sensors etc and it still comes up occasionally. I did change the petrol station i was getting fuel from and seemed to help and then it came back. My issue seem to only ...

I have service coming up and it's been about a year since I put the ITG filters in, I just hope they haven't deteriorated them same. I have however purchased some BMC filters as replacements. I thought the excess oil on the ITG filters were fouling up the MAP sensors causing me to suffer from multip...

I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems 12672119_10153541176331313_1812507389769676104_o.jpg They look great! Got any more pics side on both front and rear? Here you go, they quite deep dish TFSI 13062179_10...

Ciscokid_London wrote:I run Niche Essen 20 x 10, they are designed for the C7 so I had to use high quality spigots - runs to high speeds with no problems

12672119_10153541176331313_1812507389769676104_o.jpg

They look great! Got any more pics side on both front and rear?

Very nice, congrats on the purchase!