RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Those things are GREAT!

Ive been searching a little, this can be usefull for others. VAG has two diffrent lifters and uses both sizes for AZR and ASJ engine, its just depends on the hole where it will fit in to. So you'll need to measure your old lifters to know wich ones you´ll need to your engine. Its is a bit hard to m...

what is the size difference between the lifters on a ASJ and AZR engine?

my new lifters
exhaust 19.13mm
intake is19.49mm

i got an AZR engine.

/ Tony

Remove 3 Torx bolts on either arch liner. Remove 2 alan bolts holding the bumper to the wing on each side Remove engine belly pan, or if you don't have access to a ramp, then just unscrew the 3/4 screws holding the belly pan to the bumper Remove front fog lamp grilles. Undo 6mm(?) alan bolts holdin...

Whats the difference between ASJ and AZR enginge, i know something about EU2 and EU3 Standard?

// Tony

Thanks for that one, does somone has the workshop manual? because this one reffers to the workshop manual sometimes.

Follow this link to a picture of the exhaust camshaft.

http://www.rs246.com/index.php?name=PNp ... mage_id=79

You probably need, new cams and valve lifters.

Virdee Autos wrote:Unfortunately not

But all will become clear.

Okey thanks alot anyway, ill try to get it down tomorrow.

Remove 3 Torx bolts on either arch liner. Remove 2 alan bolts holding the bumper to the wing on each side Remove engine belly pan, or if you don't have access to a ramp, then just unscrew the 3/4 screws holding the belly pan to the bumper Remove front fog lamp grilles. Undo 6mm(?) alan bolts holdin...

Hi!

My exhaust camshafts has worn out, and i think im going to replace all camshafts.

does someone know where to buy new camshafts?

Regards Tony

Does someone know how to remove the front bumper of an RS4 B5?

That Just happend to me does someone have a workshop manual, or know where to buy new cams for a resonable price?
and does someone know how to release the front bumper? need som serius help.

Regards Tony ( in Sweden)

Okej ive cleared the codes, but i think ive have to connect the computer to it and see when im driving when the codes comes back. maybe i should change the fuelfilter? plugs? is that the sparkplugs? im from sweden so my english isnt all to good.

the G62 sensor fixed the problem, but something els came up. :( 16684 - Random/Multiple Cylinder Misfire Detected P0300 - 35-10 - - - Intermittent Possible Causes Air Intake System leaking Fuel Supply faulty Injector(s) faulty Ignition Cable(s) and/or Spark Plug(s) faulty Ignition Coil(s) faulty Exh...