RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

DutchRS4 wrote:Where is the requested boost? I suppose the last number is the actual boost. Which block did you log?

I used block 11

,5.09,2760,12.0,95.3,1160.0,,,,,,,,,, ,5.39,2960,12.0,95.3,1350.0,,,,,,,,,, ,5.69,3240,12.0,81.6,1650.0,,,,,,,,,, ,5.99,3600,12.0,68.6,2050.0,,,,,,,,,, ,6.30,4000,12.0,71.0,2190.0,,,,,,,,,, ,6.61,4440,12.0,72.2,2150.0,,,,,,,,,, ,6.94,4800,12.0,73.3,2110.0,,,,,,,,,, ,7.28,5280,12.0,73.7,2130.0,,,,,,,...

Im suspecting a leak on my rs4 and was wondering how to do this. Does anyone have any pictures of a pressure test?

I found the problem after some research. Some how the ecu has got some moist inside so it did not work. Sendt it to a company that fixes ecu`s and it it now fixed and hopefully installed tomorrow... 3months without my rs4 is quite boring

Have been checking some today,and seems that when i turn the ignition on there is no power to either the fuel pump or ecu. I measured 0v on the fuel pump and ecu fuses aswell.. It took me about 5hours to remove the engine 2 hours to replace the turbos and about 5 hours to mont the engine back in. An...

Stigter wrote:My bad. Just saw the rs4 discs. Didn't check for the brace on the outer side of the caliper - lol

No problem

Stigter wrote:B7 rs4 brakes - very nice. Good luck getting to the bottom of this and keep the forum posted.

Will do.. The brakes are rs6 8pot with 365mm discs.

[/img]

Stigter wrote:either dead ecu or issue getting power to ecu.

Rs4-Digitec nice motor. Where in the world are you?

Will check it tomorrow. Hope that it is power issues..

I live in Norway

Stigter wrote:Getting no communication with the ecu. Do you get communication with other modules?

Yes i can connect to the other ones. But not Engine

here is my car btw

[img][img]http://i76.photobucket.com/albums/j20/t ... G_0755.jpg[/img]

yes i did that. The engine turns over but does not start. The immobiliser sign does go out after 3 sec. Dont think the ecu has been damaged.

i changed them myself yes. Everything is connected the way it should be. The reason i wondered about coding is that the ecu and car has been without power for about 2months now. So maybe the immobiliser is causing the problem.

Hi. This is my first post here and i need some help. I have a 2001 rs4 with digi tec remap and a month ago my left turbo decided to give up :roll: I have now changed both turbos and mounted the engine back into the car. Everything is connected but the car won`t start. Also i can`t connect to the ecu...