RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Cheers, I'm on my second RS4 my first 'normal' ride height second RS SS+ and I'd say it's alot lower than 10mm on the back. But if I bring the front down another 25 mm might get the ride height I'm after. Decisions ..

Hi, probably been done but I have SS+ but can't help feeling the front needs to go down a tad. Will it be lower if I just change the springs to H&R or will it be the same? Can't imagine the back would need doing??

Cheers Shane.

As the title says please!

Hi I have SS+ 10mm spacers all round and continentals all round,no rubbing at all on front and only once rubbed at the rears driving fast on a bumpy road. Think 12mm might be pushing it at the back with my set up. Always wondered why people went for 8mm front I must admit

I'll be detailing the car over the Easter break so I'll get some pics up then!

I had grille surround window surround and rear bumper strip wrapped for 150 and is a huge improvement, plus all work is guaranteed.

I've got both so guess Im extra lucky!!

Don't worry Linda just seen your website and I'm a fan!!!

They went on ok and the wheel nuts tightened up fine actually the only trouble is vibration

I have just fitted some spacers to mine and the 10mm ones had the collar for the wheel to locate but the 8mm for the front didnt, both sets by h&r and all was fine till I did 60mph and it felt like the front wheels were completly out of balance with the 8mms on. I spoke to DPM and they changed the ...

Arthur, from your pic my 10mm rears are hubcentric and the front 8mm spacers are the same style as the spacer on the right of your pic. I'll remove and check everything again,all looked clean and a good fit but the fronts were a nightmare to hold in place and bolt up so I'll just check them again to...

Looks like all the weights are there. Is it anything to do with the front wheels hardly sat on the hubs?

I'll check, it's the same sensation of unbalanced wheels

Hi I recently fitted h&r hubcentric spacers 8mm front and 10mm rear and now my steering wheel vibrates rolling at about 60-65 mph any one had this problem and what's the solution cheers.

Yeah I'm probably gonna do the matt badge thing, just had black optic done and spacers to fit once all done will put pics up